566386
7
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
12
11
English
English
FREQUENTLY ASKED QUESTIONS
Q: Why doesn't the headset work with my mobile phone after the headset has been fully
charged and switched on?
A: You need to enable the Bluetooth function of your mobile phone first and pair the mobile
phone with the headset.
Q: Does the headset work with all types of mobile phones?
A: No. It works only with Bluetooth-enabled mobile phones.
Q: What is the operating range between the headset and a Bluetooth mobile phone?
A: The headset has been tested and approved by BQB. It is fully compliant to
Bluetooth V. 1.1, class II. The maximum operation distance is 10 meters. However, this
value can be affected and shortened by different circumstances and different brands of
mobile phones. Some mobile phones have a lower operating range.
Q: While my mobile phone was scanning for the headset, why did several Bluetooth devices
appear on my mobile phone display?
A: Most Bluetooth-enabled mobile phones with Bluetooth function activated can scan for
more than one Bluetooth device within their operating range. The headset will appear
as "BT headset" or "Unknown Device" on your mobile phone.
Q: Why can’t my mobile phone find the headset?
A: If the headset is not in pairing mode, your mobile phone will not find it. Please set the
headset to pairing mode before starting the scanning function on your mobile phone.
(See the User Manual of your mobile phone for detailed instructions.)
Q: Do I need to pair the headset with my mobile phone every time I use it?
A: No. Once the Pairing is set up between the two devices, they will remain paired even
after one or both devices are powered off.
Q: Why is there a disturbance noise coming from the headset?
A: The performance of the headset will be affected by two factors:
1) whether your mobile phone is in a good signal area. If your mobile phone is in weak
signal area, you will not hear clearly with the headset.
2) whether if there are barriers between your mobile phone and your headset which
can’t be penetrated.
Q: What should I do when I can't hear very well with the headset?
A: Adjust the sound volume on your mobile phone, press the S1 button on the headset to
increase the volume, or check if your mobile phone is in a good signal area. In addition
to the human body can block signals as well. When using the headset ensure that both
Bluetooth devices (headset and mobile phone) are always carried on the same side of
your body.
Q: Why doesn’t the headset work suddenly?
A: 1) The headset may have run out of battery power. In low battery condition, the red LED
indicator of the headset will start flashing.
2) Some Bluetooth mobile phones, which have a problem with the Bluetooth
implementation, will occasionally get into a Bluetooth shut-down status in unpredictable
circumstances. When this happens, please reset your mobile phone by removing the
battery. (It is not necessary to do the Pairing again.)
Make sure that your phone has the latest version of firmware loaded. Please check the
website of your mobile phone for new firmware.
Q: Why doesn’t the voice dialing function work with the headset?
A: You may have to record your voice with the headset to your mobile phone.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silvercrest HS 2700BT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silvercrest HS 2700BT in de taal/talen: Engels als bijlage per email.

De handleiding is 0,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info