575416
9
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
H-3246
7
Note:
If you want to fry only small
quantities, less oil or fat may be enough.
But the items to be fried must always be
completely covered.
2. Insert the mains plug into the mains
socket.
6.2 Melt existing fat
If the fryer already contains solidified fat from
an earlier frying session it must be melted in
the fryer. You have to do this very carefully so
that the melting fat does not start to spit or the
fryer does not overheat.
1. Insert the mains plug into the mains
socket.
Caution!
Ensure that you don’t damage the
heating element
5
with the fork.
2. Use a fork to prick a few holes in the fat
so that any steam formed can escape
more easily.
3. Press the unlock button on the handle
16
and place the lid
12
on the frying
insert
8
.
4. Use the On/Off switch
10
to switch the
stainless steel fryer on. The red pilot
lamp lights up.
5. Set the temperature control device
9
to
60 °C.
6. Let the fat melt.
7. Wait until the temperature pilot lamp
11
lights up or until the fat has melted
completely.
7. Frying
1. Use the On/Off switch
10
to switch the
stainless steel fryer on.
2. Place the lid
12
on the frying insert
8
.
3. Set the temperature control device
9
to
the desired frying temperature.
Refer to the pack of what you are frying
for the correct frying temperature.
The temperature pilot lamp
11
goes out.
The oil or fat has now heated to the
desired temperature. The temperature
pilot lamp
11
lights up in green as soon
as the oil or fat has reached the set
temperature. To keep the oil or fat at
temperature the thermostat automatically
switches the heating on and off. You can
see this when the temperature pilot lamp
11
regularly goes on and off.
Note:
We recommend that you heat the oil
for at least between 10 and 15 minutes
before you start frying. To do this, place the
lid
12
on the frying insert
8
.
Note:
You can leave the frying basket
17
in
the fryer during heating.
Warning!
When frying frozen
items, pay attention to Tip 2 (see
"12. Various tips" on page 10) to
prevent spits of fat.
Caution!
Please do not overfill the frying
basket
17
. Please read the food
manufacturer’s information about the optimum
amount. The food to be fried must be
completely covered by oil or fat.
In the frying basket
17
you will find a marking
"MAX FOOD LEVEL”
18
that indicates the
maximum level to which items to be fried may
be filled.
4. Remove the frying basket
17 from the
stainless steel fryer and place the items
to be fried in it.
RP46891-Fritteuse LB6 Seite 7 Donnerstag, 7. Januar 2010 5:34 17
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silvercrest H 3246 - IAN 46891 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silvercrest H 3246 - IAN 46891 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Silvercrest H 3246 - IAN 46891

Silvercrest H 3246 - IAN 46891 Gebruiksaanwijzing - Nederlands, Deutsch, Français - 38 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info