569394
5
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
9 GB/IE
Setting up
ton
2
of one channel. In addition,
you can programme six remote
controls one after the other and use
them for individual receivers. This
means you can switch one appliance
on and off from up to six different
places.
6. In this case, synchronise every remote-
controlled socket with the channel
of the remote control.
7. The coding of the remote control is
maintained when you change the
battery.
8. If you disconnect the remote-con-
trolled socket from the power supply,
the codings will be permanently
stored.
9. In order to delete the codings again,
press the LEARN button
7
longer
than 6 seconds until the LED oper-
ating status display
6
starts to flash.
All codings will now be deleted.
10. Avoid interference: Make sure that
the distance between the various
remote-controlled sockets is ap-
prox. 50 cm.
11. Every remote-controlled socket also
has a manual ON / OFF switch
5
.
You can switch the remote-controlled
socket on and off without using the
remote control. The LED operating
status display
6
will indicate
whether the remote-controlled sock-
et is in the ON / OFF mode.
Q
Setting up the remote-
controlled dimmer socket
(FSD B 20-A) (fig. B)
1. Insert the remote-controlled socket
into an earthed household socket
and switch it on with the ON / OFF
switch
5
.
2. Point the remote control at the remote-
controlled socket at a distance of
approx. 50 cm.
3. Press the LEARN button
7
of the
remote-controlled socket for ap-
prox. 3 seconds and release it again.
The LED operating status display
6
will flash for approx. 10 seconds.
While it is flashing, press the desired
ON button of the channel ON /
OFF button
2
(A, B, C or D) of the
remote control. The LED operating
status display
6
will now shine
permanently. You can now switch a
connected consumer on or off using
the remote control.
4. The coding of the remote control will
be maintained even when you
change the battery.
5. When you unplug the remote-con-
trolled sockets from the power supply,
the codings will be stored perma-
nently.
6. Avoid interference: Make sure that
the distance between the various
remote-controlled sockets is ap-
prox. 50 cm.
7. In order to delete the codings again,
press the LEARN button
7
longer
than 6 seconds until the LED oper-
ating status display
6
starts to flash.
All codings will now be deleted.
66538_silv_Funkschaltset_Content_GB-IE.indd 9 29.06.11 11:45
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silvercrest 66538 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silvercrest 66538 in de taal/talen: Engels als bijlage per email.

De handleiding is 1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Silvercrest 66538

Silvercrest 66538 Gebruiksaanwijzing - Nederlands, Deutsch, Français - 32 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info