298552
5
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
3
Gigaset A155 / GBR / A31008-M1717-L101-2-7619 / Ohio_AM_GBR.fm / 12.09.2005
The polarity is indicated in/on the battery compart-
ment.
Closing the battery cover
Position the cover pointing slightly downwards
and push it up until it clicks into position.
Opening the battery cover
Press below the upper curve on the battery cover
and slide down.
Step 3: Charging the batteries
To charge the batteries, place the handset in
the base/charging cradle and leave for approx. 12-
15 hours. The batteries are now fully charged. The
battery charging status is correctly displayed only
after uninterrupted charging/discharging. There-
fore you should not interrupt the charging process.
Charging is controlled electronically to prevent the
batteries from overcharging. The batteries heat up
during charging. This is normal and not dangerous.
After a time the charge capacity will decrease for
technical reasons.
The charge status of the batteries appears at the
top right of the display:
The handset is already registered with the base sta-
tion. You must set the date and time to ensure that
the times of calls are logged correctly (page 7).
Your telephone is now ready to use.
Activating/deactivating the handset
Press and hold the end call key a.
If you place a deactivated handset in the base sta-
tion/charging cradle, it will automatically activate.
Activating/deactivating the keypad lock
You can "lock" the keys on the handset to protect
the keypad against inadvertent activation.
To activate: press and hold the hash key
R.
The display shows the icon
Ø.
To deactivate: press and hold the hash key
R.
The keypad lock deactivates automatically when
you receive a call and activates again after the call.
When the keypad lock is active you cannot even
call emergency numbers!
Making calls
Making external calls/Ending a call
External calls are calls using the public telephone
network.
~
(Enter the number) ¢c.
The number is dialed. (Or you can first press and
hold
c[dial tone] and then enter the number.)
During the call you can adjust the earpiece volume
as follows:
j ¢ H/SET VOL ¢ OK
Select the volume with x and w and confirm
with
OK.
Ending the call/canceling dialing:
Press the end call key
a.
Answering a call
Your handset rings and you wish to take the call:
Press the talk key
c.
If "Auto Answer" is active (page 8) just lift the
handset out of its base/charging cradle.
Calling Line Identification
When you receive a call, the caller's number will be
displayed on your handset; the caller's name will
be displayed if it is stored in the directory or if CNIP
has been requested.
Requirements:
1 You have asked your network provider for the
caller's number (CLIP) or name (CNIP) to be dis-
played on your handset screen.
2 The caller has asked the network provider for
his number to be identified (CLI).
W
Never use non-Siemens chargers as
these could damage the batteries.
Only place the handset in the base/
charging cradle that is intended for it.
batteries flat
Š batteries 1/3 charged
batteries 2/3 charged
Πbatteries fully charged
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Siemens gigaset a155 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Siemens gigaset a155 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Siemens gigaset a155

Siemens gigaset a155 Gebruiksaanwijzing - Nederlands - 39 pagina's

Siemens gigaset a155 Gebruiksaanwijzing - Deutsch - 13 pagina's

Siemens gigaset a155 Gebruiksaanwijzing - Français - 14 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info