620382
6
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
6/56 CC1B7865E February 10, 2000 Landis & Staefa Division
1. Introduction
Please read this User Manual before starting up the controller. Keep the Manual in a
place that is accessible to all users at all times. Please help us improve the Manual.
Your suggestions will be welcome.
All necessary settings and, where required, settings inside the unit are described in this
User Manual, for controller software version 126.01.01.
Ö
Section 6.2.5
«Display software version and dimensional unit»
Should any difficulties arise during commissioning, you are asked not to carry out any
unauthorized manipulations on the unit. You could endanger your rights under the unit
warranty! Please contact us in such a case.
When returning modules, assemblies or components to Landis & Staefa, the regulations
of DIN EN 100 015 «Protection of electrostatically sensitive devices» must be observed.
Use only the appropriate
ESD
packaging for transport.
Please note that we cannot accept any liability for damage caused by ESD.
ESD = electrostatic discharge
The RWF40... is used primarily for controlling temperature or pressure in oil- or gas-fired
heating plants. It is a compact 3-position controller without position feedback that acts
on the burner. An external switch can be used to change it over to a 2-position controller
for the control of two-stage burners. The built-in thermostat function switches the burner
on and off. An adjustable response threshold is used to switch to a higher burner output
(high-fire operation).
A shift controller controls the temperature or pressure. Minimum and maximum limits for
the setpoint can be set. A self-setting function is available as a standard feature.
The plug-in controller module measures 96 x 48 x 127.5 mm and is especially suited for
mounting in control panels. The controller incorporates two 4-digit 7-segment displays
for the actual value (red) and setpoint (green). A limit comparator is also provided and
its switching behavior can be set on the configuration level.
A selection can be made between eight different limit comparator functions.
An RS-485 interface is used for integration into a data network. Output 5 can be used as
a modulating output for modulating or 2-stage operation.
All connections are made via screw terminals at the rear of the unit.
1.1 General notes
)
*
1.2 Description
Use
Control
Options
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Siemens RWF40 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Siemens RWF40 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info