462306
6
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
6/40 02.02.2010 CE1G2203xx
Configuration and function check REV17.
1 Configuration
1.1 DIP switches
ON / OFF 1 2 3 4 5 6 7
See
Sensor calibration on
Periodic pump run on
See
1.1.1
Sensor calibration off
Periodic pump run off
1.1.5
Setpoint limitation
16…35 °C
Quartz
1.1.2
Setpoint limitation
3…35 °C
Radio clock
1.1.6
Temperature display °F
1.1.3
Temperature display °C
PID self-learning
PID 6
PID12
1.1.4
2-Point
When changing one or several
DIP switch positions, a DIP
switch reset must be made by
pressing the DIP switch reset
button (also refer to Fig.
)
Otherwise, the previous
settings will be maintained!
DIP switch reset
ON
1 342
2211Z32
567 89
1.1.7
Factory setting: All DIP switches OFF
1.1.1 Sensor calibration: DIP switch 1
Set the DIP switch to ON and press the DIP switch reset button:
The display shows CAL. The room temperature currently acquired
blinks.
Press
or to make a recalibration of max. ± 5 °C. To save
the entry, set the DIP switch to OFF and press the DIP switch reset
button (also refer to Fig.
).
1.1.2 Setpoint limitation: DIP switch 2
DIP switch ON: Setpoint limitation 16…35 °C
DIP switch OFF: Setpoint limitation 3…35 °C
(factory setting)
Save the entry by pressing the DIP switch reset button.
1.1.3 Temperature display in °C or °F:
DIP switch 3
DIP switch ON: Temperature display in °F
DIP switch OFF: Temperature display in °C
(factory setting)
Save the entry by pressing the DIP switch reset button
(also refer to Fig.
).
1.1.4 Control action: DIP switches 4 and 5
DIP switch 4 ON and 5 ON: PID self-learning
Adaptive control for all types of application.
DIP switch 4 ON and 5 OFF: PID 6
For fast controlled systems, applications at locations with
great temperature variations.
DIP switch 4 OFF and 5 ON: PID 12
For normal controlled systems, applications at locations
with normal temperature variations.
DIP switch 4 OFF and 5 OFF: 2-Point
For difficult controlled systems, 2-position controller with
a switching differential of 0.5 °C (factory setting).
Save the entry by pressing the DIP switch reset button
(also refer to Fig.
).
1.1.5 Periodic pump run: DIP switch 6
Can only be used when circulating pump or valve is controlled!
This function protects the pump or valve against seizing during
longer off periods. Periodic pump run is activated for 3 minutes
every 24 hours at 12:00 (display showing symbol
).
DIP switch ON: Pump run on (also refer to Fig.
)
DIP switch OFF: Pump run off (factory setting)
Save the entry by pressing the DIP switch reset button.
1.1.6 Radio clock: DIP switch 7
Can only be used with REV..DC (with integrated DCF77 receiver for
time signal from Frankfurt)!
DIP switch ON: Clock runs on built-in
quartz
DIP switch OFF:
Time signal DCF77 from Frankfurt
Save the entry by pressing the DIP switch reset button
(also refer to Fig.
).
1.1.7 DIP switch reset
When changing one or several DIP switch positions, press the DIP
switch reset button to make a DIP switch reset.
Otherwise, the previous settings will be maintained!
(Also refer to Fig.
).
2 Accessing the expert level
Move the selector slider to the RUN position and press simultaneously and for 3 seconds, then release the buttons and, within 3
seconds, press simultaneously
and for 3 seconds, release and keep depressed for another 3 seconds. This enables you to
access the expert level for making the settings on that level.
on display (also refer to Fig. G).
Starting with code 00, the display shows the choice of languages. Navigation on the expert level is made possible with
and . Confirm the
settings by pressing
.
The expert level is quit by pressing the operating mode selection button
.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Siemens-REV17

Zoeken resetten

  • Als ik de chauffage aanzet, dan kies ik het knopje "zon"; om af te zetten, dan kies ik met hetzelfde knopje voor "maan". Sinds gisteren kan ik de chauffage niet meer afzetten. Zelfs al staat de thermostaat op "maan" dan verwarmt het systeem het huis. Gesteld op 16-11-2023 om 09:58

    Reageer op deze vraag Misbruik melden
  • BEste,
    mijn REV17 springt continu aan/uit met (luid) klikniveau. Chauffage werkt dus ook niet zoals het moet, chauffage voelt lauw aan. Wat kan het probleem zijn? Gesteld op 28-1-2021 om 22:07

    Reageer op deze vraag Misbruik melden
  • Hoe kan ik bij een rev17 de afstandsbediening uitschakelen ? Gesteld op 24-4-2020 om 18:52

    Reageer op deze vraag Misbruik melden
    • BEste, ik vraag me dit ook af. Wij hebben geen actieve afstandsbediening, toch blijft dat icoon knipperen en werkt onze chauffage niet sinds de installatie. Wordt enkel lauw met een omgevingstemperatuur van 16*Graden.... Geantwoord op 28-1-2021 om 21:38

      Waardeer dit antwoord Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Siemens REV17 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Siemens REV17 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 1,24 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Siemens REV17

Siemens REV17 Gebruiksaanwijzing - Nederlands - 2 pagina's

Siemens REV17 Gebruiksaanwijzing - Deutsch - 2 pagina's

Siemens REV17 Gebruiksaanwijzing - English - 2 pagina's

Siemens REV17 Gebruiksaanwijzing - Français - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info