620389
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Siemens Building Technologies CB1B3064en 23.08.2010 1 / 2
Operating Instructions RDF510.2
RDF510.2 the temperature controller that allows you to set the ideal room temperature you want. The controller provides
normal operation with comfort mode and protection mode.
The fan operates either in automatic mode or at the selected speed when using manual mode. You can either rely on the
factory settings or make adjustments that suit your individual needs.
Are your rooms too warm or too cold?
+ /
Only applicable in normal operation (Comfort mode ).
Pressing + or allows you to increase or decrease the current room temperature setpoint
for normal operation (Comfort mode ) in increments of 0.5 °C. The maximum setting
range is from 5...40 °C, unless it is limited by parameters P05 and P06.
Do you want to set your controller to protection mode?
Press the operating mode button several times until the indicator
stop right beside the
Protection mode symbol .
In protection mode , the controller can maintain the lower setpoint of heating for frost
protection according to parameter P03 or the higher setpoint of cooling for moldy resistance
according to parameter P04.
Important:
If the setpoint of protection is set to OFF, the controller will not be activated in protection
mode.
Risk of frost!
Do you want to change the fan mode?
Press the fan mode button until you have selected the desired fan mode.
In automatic mode, the fan speed is automatically selected by the controller and depends
on the setpoint and the actual room temperature. When the room temperature has reached
the setpoint, the fan either remains in fan speed low (factory setting) or switches off
(parameter P21).
In manual mode the fan operates independently and always runs at the same speed:
Low, medium or high.
The actual fan speed is indicated by:
Low Medium High
Do you want to change from heating to cooling mode?
or
When pressing the Heat/Cool mode selector continuously (without intermit tent stop), the
controller changes from heating to cooling or vice versa.
If the controller is commissioned cooling only or heating only, no changeover is possible
(please see parameter P22: factory setting manual H/C changeover).
Recalibrating the sensor
If the room temperature displayed by the controller does not agree with the temperature effectively
measured, the temperature sensor can be recalibrated. For that purpose parameter P07 must be changed.
Proceed as described under Changing the control parameters and follow steps 1 through
3 to select parameter P07.
With step 4, the room temperature displayed can now be matched to the temperature
effectively measured. Each push of the + or button changes the temperature by + or -0.5
°C up to a maximum of + or -3 °C.
With step 7, the recalibration is automatically stored after pressing the + and
simultaneously at End.
Measured room temperature, setpoints
and parameters; °C or °F
Room temperature
Fan mode button
- changing the fan mode
(Auto / manual)
- changing the fan speed
(Low / Medium / High)
H
eat
/C
ool mo
de selector
Cooling mode
Heating mode
Operating mode button
Comfort mode
Protection mode
Button lock/unlock
Colder / Warmer
Changing the room temperature setpoint
Button lock active
Fan Speed
Low Medium High
Automatic fan active
Heat/Cool Mode:
Cooling mode
Heating mode
Operating Mode:
Comfort mode
Protection mode
Indicator for selecting mode
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Siemens RDF510.2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Siemens RDF510.2 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,59 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Siemens RDF510.2

Siemens RDF510.2 Installatiehandleiding - Alle talen - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info