655009
15
Verklein
Vergroot
Pagina terug
1/108
Pagina verder
EN -13-
CHAPTER -6: TROUBLESHOOTING
Check Warnings;
Your fridge warns you if the temperatures for cooler and freezer are in improper levels or when a problem occurs in the
appliance. Warning codes are displayed in the Freezer and Cooler Indicators.
If your fridge is not operating;
Is there a power failure?
Is the plug connected to the socket correctly?
Is the fuse of the socket to which the plug is connected or the main fuse blown?
Is there any failure at the socket? To check this, plug your refrigerator into a known working socket.
If your fridge is not cooling enough;
Is the temperature adjustment right?
Is the door of your fridge opened frequently and left open for a long while?
Is the door of fridge closed properly?
Did you put a dish or food on your fridge so that it contacts the rear wall of your fridge so as to prevent the air
circulation?
Is your fridge lled excessively?
Is there adequate distance between your fridge and the rear and side walls?
Is the ambient temperature within the range of values specied in the operating manual?
If the food in your refrigerator compartment is over cooled
Is the temperature adjustment right?
Are there many food recently put inside the freezer compartment? If so, your fridge may over cool the food
inside the refrigerator compartment as it will operate longer to cool these food.
If your fridge is operating too loudly;
To maintain the set cooling level, compressor may be activated from time to time. Noises from your fridge at this time
are normal and due to its function. When the required cooling level is reached, noises will be decreased automatically.
ERROR TYPE ERROR TYPE WHY REMEDY
Sr
"Failure
Warning"
Some parts have stopped
working or there is a failure
in the cooling process
Contact the Sharp help desk as soon as
possible.
Sr – Set
value blink
on the
freezer set
value screen
Freezer comp. Not
Cold enough
This warning will be seen
especially after a long term
power failure
1. Do not freeze the foods that have
thawed and use it in a short time period.
2. Set the freezer temperature to colder
values or set the super freeze, until
the compartment achieves a normal
temperature.
3. Do not put in fresh food until this
warning is off.
Sr – Set
value Blink
on the cooler
set value
screen
"Refrigerator comp.
Not Cold enough"
Ideal temperature for Ref.
Compartment is +4
o
C. If
you see this warning your
foods is at risk of spoiling.
1. Set the refrigerator temperature to
colder values or set the super cooling
mode until the compartment achieves a
normal temperature.
2. Do not open the door frequently until
this warning is removed.
Sr – Set
value blink
on the
freezer and
cooler set
value screen
"not cold enough
Warning"
This is a combination of
"not cool enough" error for
both of the compartments.
You will see this failure when rst starting
the appliance. It will switch off after
the compartments achieves a normal
temperature
Sr – Set
value blink
on the cooler
set value
screen
Refrigerator comp.
too Cold
The foods starts to freeze
because the temperature
is too low.
1. Check if the “Super cooling mode”
is on
2. Decrease the refrigerator temperature
values
“--”
"Low voltage
Warning"
When the power supply
goes lower than 170 V,
the appliance goes into a
steady position.
This not a failure. This prevents any
damage to the compressor. This warning
will go off after the voltage achieves the
required level
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp SJ-BA31IEXW2-EU bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp SJ-BA31IEXW2-EU in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans, Deens als bijlage per email.

De handleiding is 6,74 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info