526665
27
Verklein
Vergroot
Pagina terug
1/33
Pagina verder
27
E
Troubleshooting
If you are experiencing any problem with your display, before
calling for service, please review the following troubleshooting
tips.
There is no picture or sound.
• AretheACadapterandpowercordproperlyconnected?
(See page 13.)
• Isthemainpowerswitchoff?(Seepage15.)
• Isthemonitorinstandbymode(powerlampisoff)?(See
page15.)
• Ifanyexternalequipmentisconnected,makesurethe
equipmentisoperating(playingback).
Sound from left and right speakers is reversed.
Sound is heard from only one side.
• Areaudiocablesconnectedproperly?(Seepage12.)
There is a picture but no sound.
• Isthesoundmuted?
• Makesurethevolumeisnotsettominimum.
• Areaudiocablesconnectedproperly?
• IsthesettingofAUDIOSELECTontheSETUPmenu
correct?(Seepage20.)
• Istheheadphone(etc.)cableconnectedtotheheadphone
terminal?
The sound crackles.
• Turndownthevolume.
Withsomeinputdevices,thesoundmaycrackleathigh
volume.
Unstable video.
• Thesignalmaybeincompatible.
The video from DisplayPort input terminal does not
appear properly.
• IsthecableacertiedDisplayPortcable?Usethesupplied
cable.Themonitorwillnotworkunlessastandards-
compliant cable is used.
• Istheinputsignalcompatiblewiththismonitor?
(Seepage30.)
The video does not appear properly even after the
DisplayPort STREAM setting is changed.
• Tryrestartingthemonitorandcomputer.
• IsthevideocardMST(MultiStream)compatible?Ifnot,set
toSST(SingleStream).
Control buttons do not work.
There is no picture.
• Loadnoisesfromoutsidemaybeinterferingwithnormal
operation.Turnoffthepowerandturnitonafterwaitingat
least5seconds,andthenchecktheoperation.
• Whenyoudisplaythescreenorclearthescreen,theleft
and right screen display timing may be slightly off; however,
this is not a problem.
Power LED ashes red.
“STATUS [xxxx]” appears in the corner of the screen.
• Hardwarehasaproblem.Turnoffthemonitorandrequest
repairfromyourSHARPdealer.
(WhenSTATUSALERTissettoOSD&LED.Thisvaries
depending on the setting.)
When “AUTO DIMMING” is displayed.
•
When the internal temperature of the monitor rises excessively,
thebrightnessofthebacklightautomaticallydecreasesin
order to prevent a further temperature rise.
If you attempt to use brightness adjustment button (
/ ) to
adjustthebrightnesswhilethemonitorisinthisstate,“AUTO
DIMMING”isdisplayedandyoucannotchangethebrightness.
• Removethecauseoftheexcessivetemperaturerise.
The monitor makes a cracking sound.
• Youmayoccasionallyhearacrackingsoundfromthe
monitor.Thishappenswhenthecabinetslightlyexpands
andcontractsaccordingtochangeintemperature.This
does not affect the monitor’s performance.
The Power LED is ashing in red and green alternately.
When “TEMPERATURE” is displayed in the corner of the
screen.
• Whentheinternaltemperatureofthemonitorrises
excessively,thebrightnessofthebacklightdecreases
automaticallyinordertopreventhigh-temperature-
relatedproblems.Whenthisoccurs,“TEMPERATURE”is
displayedonthescreenandthePowerLEDashesred
andgreenalternately.(WhenTEMPERATUREALERTis
settoOSD&LED.Thisvariesdependingonthesetting.)
• Iftheinternaltemperaturerisesfurther,themonitor
automaticallyentersstandbymode.(ThePowerLED
continuesashingredandgreenalternately.)
• Removethecauseoftheexcessivetemperaturerise.
-Ifthemonitorentersstandbymodeduetoarisein
temperature, to return to normal display, turn the power
switchoffandthenbackonagain.Themonitor,however,
will enter standby mode again if the cause of the
temperature rise is not eliminated. (See page 7.)
-Checkwhetherthemonitorisplacedatalocationwhere
aquickriseintemperatureislikely.Internaltemperature
risesquicklyiftheventsonthemonitorareblocked.
-Internaltemperaturerisesquicklyifdustaccumulates
insidethemonitororaroundthevents.Removedustif
possible.AskSHARPdealeraboutremovinginternaldust.
A residual image has occurred.
After the image has changed, the previous image is faintly
visible.
• Displayingthesameimageforanextendedtimemay
cause a residual image.
• Toimprovearesidualimage,keepthepoweroff.Withthe
power off state, the residual image will gradually disappear
as time passes. If there is no improvement, display a full
white screen or an animated image.
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp PN-K321H bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp PN-K321H in de taal/talen: Engels als bijlage per email.

De handleiding is 3,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Sharp PN-K321H

Sharp PN-K321H Snelstart handleiding - Deutsch - 44 pagina's

Sharp PN-K321H Gebruiksaanwijzing - Deutsch - 33 pagina's

Sharp PN-K321H Snelstart handleiding - English, Français, Espanõl - 44 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info