649300
238
Verklein
Vergroot
Pagina terug
1/915
Pagina verder
2-76
COPIEROTHER FUNCTIONS
USING TWO MACHINES TO REDUCE THE COPY TIME
(TANDEM COPY)
This function shares a copy job half-and-half between two machines connected to the network, enabling the reduction of
the copy time.
Master machine and client machine
The master machine performs only scanning, and a client machine registered in the master machine performs only
printing without scanning the original.
To use this function, two machines must be connected to your network.
Even if more machines are connected to the network, this function can only be used to have one other machine share a
job.
To configure the tandem connection setting, register IP address information of the client machine in the master machine.
For the port number, it is best to use the initial setting (50001). Unless you experience difficulty with this setting, do not
change the port number. The tandem setting should be configured by your network administrator. If the master machine and
client machine will switch roles, configure the IP address of the master machine in the client machine. The same port
number can be used for both machines.
In this situation:
A saddle stitch finisher is installed in the master machine while not installed in a client machine.
• Tandem Copy is enabled when specifying copies without stapling.
• Tandem Copy is disabled when specifying copies with stapling.
As shown here, if Tandem Copy is enabled using a function provided in the master machine and not provided in a client
machine, a message will appear.
If a machine runs out of paper
If either the master machine or the client machine run out of paper, the machine that ran out of paper will hold the job while
the machine that still has paper continues the job. When paper is added to the machine that ran out, the job resumes.
If user authentication is specified
• Tandem Copy is enabled when user authentication is specified in the master machine.
Tandem Copy is disabled when user authentication is specified in the client machine while it is not specified in the master
machine.
If an odd number of sets is being made, one more set is output to the master machine.
To use Tandem Copy:
In "Settings (administrator)", select [System Settings] [Common Settings] [Device Control] [Tandem Connection
Setting].
Execute 4 sets of copies
Master machine
Client machine
2 sets of copies
2 sets of copies
Network environment
238

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp MX-3570N bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp MX-3570N in de taal/talen: Engels als bijlage per email.

De handleiding is 25,51 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Sharp MX-3570N

Sharp MX-3570N Gebruiksaanwijzing - Nederlands - 944 pagina's

Sharp MX-3570N Gebruiksaanwijzing - Deutsch - 944 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info