745386
9
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
EN
2. Activate your Bluetooth device and select the search mode.
“SHARP HT-SBW460” will appear on your Bluetooth device list.
If you cannot  nd the unit, press and hold the button on the remote
control or button on the unit to be searchable. The display will show
“PAIR” and you will hear "Pairing" from the unit.
3. Select “SHARP HT-SBW460” in the pairing list. After successful pairing,
you will hear "Paired" from the unit, and the display panel shows “BT”.
4. Play music from the connected Bluetooth device.
To disconnect the Bluetooth function, you can:
Switch to another function on the unit.
Disable the function from your Bluetooth device.The Bluetooth device
will be disconnected from the unit after the “Disconnected” voice
prompt.
Press and hold the button on the remote control or button on the
unit.
TIPS:
Enter "0000" for the password if necessary.
If no other Bluetooth device pairs with this player within two minutes,
the player will recover its previous connection.
The player will also be disconnected when your device is moved beyond
the operational range.
If you want to reconnect your device to this player, place it within the
operational range.
I f the device is moved beyond the operational range, when it is brought
back, please check if the device is still connected to the player.
If the connection is lost, follow the instructions above to pair your device
to the player again.
Listen to Music from Bluetooth Device
If the connected Bluetooth device supports Advanced Audio Distri-
bution Pro le (A2DP), you can listen to the music stored on the device
through the player.
If the device also supports Audio Video Remote Control Pro le (AVRCP),
you can use the player's remote control to play music stored on the
device.
1. Pair your device with the player.
2. Play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if it supports AVRCP).
To pause/resume play, press the button on the remote control or
on the unit.
To skip to a track, press the / buttons on the remote control.
USB
USB Operation
1. Insert the USB device.
2. Press the button repeatedly on the unit or press the button on
the remote control to select USB mode.
3. During playback:
To pause or resume play, press the button on the remote control or
on the unit.
To skip to the previous/next  le, press the / buttons on the
remote control.
TIPS:
USB devices up to 32GB are supported.
Only MP3  les can be played back.
Troubleshooting
No power
Ensure that the AC cord of the soundbar and subwoofer are correctl
connected.
Ensure that there is power at the AC outlet.
Press (standby) button to turn the unit on.
Remote control does not work
Before you press any playback control button,  rst select the correct
source.
Reduce the distance between the remote control and the unit.
Insert the battery with its polarities (+/-) aligned as indicated.
Replace the battery.
Aim the remote control directly at the sensor on the front of the unit.
No sound
Make sure that the unit is not muted. Press MUTE or VOL+/VOL– button
to resume normal listening.
Press button on the unit or on the remote control to switch the soundbar
to standby mode. Then press the button again to switch the soundbar
on.
Unplug both the soundbar and the subwoofer from the mains socket,
then plug them again. Switch on the soundbar.
Ensure the audio setting of the input source (e.g. TV, game console, DVD
player, etc.) is set to PCM or Dolby Digital mode while using digital (e.g.
HDMI, OPTICAL, COAXIAL) connection.
The subwoofer is out of range, please move the subwoofer closer to the
soundbar. Make sure the subwoofer is within 5 m of the soundbar (the
closer the better).
The soundbar may have lost connection with the subwoofer. Re-pair
the units by following the steps on the section “Pairing the Wireless
Subwoofer with the Soundbar”.
The unit may not be able to decode all digital audio formats from the
input source. In this case, the unit will mute. This is NOT a defect.device
is not muted.
TV has display problem while viewing HDR content from HDMI source.
Some 4K HDR TVs require the HDMI input or picture settings to be set for
HDR content reception. For further setup details on HDR display, please
refer to the instruction manual of your TV.
I can’t  nd the Bluetooth name of this unit on my Bluetooth device for
Bluetooth pairing
Ensure the Bluetooth function is activated on your Bluetooth device.
Ensure you have paired the unit with your Bluetooth device.
This is a 15 mins power off function (ERPII standard requirement for
saving power)
When the unit's external input signal level is too low, the unit will be
turned o automatically in 15 minutes. Please increase the volume level
of your external device.
The subwoofer is idle or the indicator of subwoofer does not light up.
Please unplug power cord from the mains sockect, and plug it in again
after 4 minutes to resent the subwoofer.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp HT-SBW460 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp HT-SBW460 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 6,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info