679538
3
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
1
ENGLISH
Before using your product, read all safety instructions. For full instructions
please refer to the user guide available to download from the website www.
sharpconsumer.eu.
Panels & Controls
-1. Front Panel
1. MODE/ Press to turn on the radio, or switch to Standby mode, or
change the mode DAB/DAB+, FM, Bluetooth.
2. Volume Knob/EQ/SNOOZE – Use to adjust the volume level, or
change the sound e ects: Classic, Rock, Pop, Jazz, Dance, Live and O ,
or activate the snooze function.
3. SLEEP Press to activate the sleep timer: o /15/30/45/60/90 minutes.
4. INFO/MENU Press to view the station information, or enter main
menu setting screen.
5. ENTER/SCAN Use to con rm the selection, or scan the stations.
6. PRESET Press to recall the preset stations.
7. PREVIOUS Press to go back to the last selection, or decrease the
frequency, or seek the last strongest station.
8. NEXT Press to go forward to the next selection, or increase the
frequency, or seek the next strongest station.
9. DISPLAY SCREEN – To show the information.
-2. Rear Panel
10. Telescopic Aerial – To receive the FM signal.
11. DC Power Input – DC 5V
General Operating Instructions
Mains Adaptor (supplied with the package)
Connect the mains adaptor to the DC power socket on the rear panel of
the radio.
Turn On the Radio
Press the MODE/STANDBY button to turn on the radio.
Switch to Standby Mode
When in use, long press the MODE/STANDBY button to enter Standby
mode. Press it again to wake up the radio.
The  rst time the radio is used
The  rst time you turn the radio on it will automatically scan for stations.
Snooze function
When the alarm is sounding in Standby mode, rotate the Volume Knob to
activate the SNOOZE function.
Time Auto Update
The time and date can be updated automatically if the system detects the
RDS signal. If the RDS signal is weak or cannot be detected, the time will
not automatically update.
Main Menu Setting
Long press the INFO/MENU button to enter the main menu setup screen.
Find and enter the <System> screen by pressing the ENTER/SCAN button.
Then use the / button to cycle through the menu options: <Time
setup>, <Alarms>, <Sleep>, <Language>, <Prune>, <Station Order>,
<Backlight>, <Factory reset>, <SW version>.
NOTE: The <Prune> and < Station Order> are only available in DAB mode.
Select one of the options and then press the ENTER/SCAN button to
access that menu.
Alarms
When the <Alarms> appears,
1. Press ENTER/SCAN button to enter the alarm setting screen.
2. Choose <Alarm 1: o > or <Alarm 2: o >, press the ENTER/SCAN
button to set the alarm On.
3. Using the / button to select the alarm time, press ENTER/SCAN
to con rm.
4. Select the alarm days: Daily, Once, Weekdays, Weekends.
5. Set the alarm mode: DAB, FM, Buzzer.
6. Set the alarm volume: there is a slide bar adjusting the alarm volume,
press / button to increase or decrease the volume level, press
ENTER/SCAN button to con rm.
7. After all the above settings, enter the Save screen, press ENTER/SCAN
button to save the alarm.
8. To cancel the alarms, enter the alarm setting screen, press ENTER/
SCAN button to select O and then enter save screen to save the alarm
o setting.
DAB/DAB+ Operations
Scan Stations
When turning on to DAB/DAB+ mode, the radio will automatically scan the
stations it found in this area.
Press the /button to select the previous or next stations, then press
the ENTER/SCAN button to activate to play the station.
Station Tuning
Long press the INFO/MENU button, when the <Station scan> appears,
press the ENTER/SCAN button, then use the /button to cycle through
the scanning options: <Full scan>, <Manual tune>.
1. Select the <Full scan>, and then press ENTER/SCAN button to enable
full scanning.
2. Select the <Manual tune> and press ENTER/SCAN button, use /
button to select stations from 5A:174.928MHz to 13F:239.200MHz.
Then press ENTER/SCAN button to activate the selected station.
FM Operations
Switch to FM mode by pressing the MODE/STANDBY button.
Select Stations
To search for an FM station from 87.5 to 108.00MHz.
1. Press the or button to skip to go back or go forward the
frequency by the step of 0.05MHz.
2. Long press the or button to skip to the previous or next station
of the strongest reception. Once a station has been found, it stops
scanning automatically. If no station is found, it will stop after it has
cycled through the entire frequency.
Tuning Stations
1. Long press the ENTER/SCAN button to scan the stations. During
scanning, the screen will display a slide bar that indicate the progress of
the scan and the amount of radio stations that have been found so far.
Once the scan has  nished, the radio will play the  rst station it found.
Store Stations
It is possible to store up to 10 of your favourite FM/DAB stations. This will
enable you to access your favourite stations quickly & easily.
1. To store a preset, you must  rst be listening to the station you would
like to save.
2. Press the PRESET button.
3. Use the /button to select desired preset number 1-10.
4. Press and hold the ENTER/SCAN button to con rm.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Sharp-DR-450

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp DR-450 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp DR-450 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 1,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Sharp DR-450

Sharp DR-450 Gebruiksaanwijzing - Deutsch, English, Français, Italiano, Espanõl, Polski - 42 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info