823059
10
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
10
Live TV
Tuning terrestrial (air) channels
To start automatic channel scanning, follow the steps below:
1. Press the (quick settings) button, then select [Settings] >
[Channels & Inputs] > [Channels] > [Antenna].
2. Select [Channel Scan] to start tuning all available channels.
3. Select [Single RF Scan] to tune only a single frequency band
(multiplex).
Before you start tuning channels, you can change the tuning settings in
the [Antenna]menu:
[LCN]Toggles Logical Channel Numbering (LCN) on or o. With LCN on,
digital TV channels are sorted according to the provider’s preferences. Keep
in mind that enabling LCN might limit your ability to rearrange channel
positions or alter channel numbering.
[Channel Scan Type] – Select the type of channels to be tuned.
[All] – All channels will be tuned.
[Only Encrypted Channels]Tunes only encrypted channels that
require a CAM module or CAM with a smartcard.
[Only Free Channels] – Only free channels will be tuned.
[Channel Store Type] – Selects the type of channels to be stored in the TV
memory after tuning.
[All] – All channels will be stored.
[Only Digital Channels] – Only TV channels will be stored.
[Only Radio Channels] – Only radio channels will be stored.
Tuning cable channels
To start automatic channel scanning, follow the steps below:
1. Press the (quick settings) button, then select [Settings] >
[Channels & Inputs] > [Channels] > [Cable] > [Channel Scan].
2. Select one of the available cable operators. If your cable operator is
not present in the list, select [Others].
3. In the Scan menu, select one of the following options from [Scan
Mode]:
[Full]Tunes channels on all possible frequencies. Tuning may take a long
time.
[Quick]Tunes channels based on the frequency and network ID provided
by your cable operator. If you set Frequency to Auto, the TV will scan all
frequencies from lowest to highest until homing channel is found. It then
quickly tunes the remaining channels based on the homing channel
information.
[Advanced] – Tunes channels based on the frequency and network ID
provided by your cable operator. If you set Frequency to Auto, the TV
will scan only predened operator frequencies until a homing channel is
found. It then quickly tunes the remaining channels based on the homing
channel information.
To tune a single frequency:
1. Press the (quick settings) button, then select [Settings] >
[Channels & Inputs] > [Channels] > [Cable] > [Single RF Scan].
2. Set additional scan options such as frequency and symbol rate, then
select [Scan] and press [OK] to start scanning.
Before you start channel scanning, you can change the scanning settings
in the [Cable] menu:
[LCN]Toggles Logical Channel Numbering (LCN) on or o. With LCN on,
digital TV channels are sorted according to the provider’s preferences. Keep
in mind that enabling LCN might limit your ability to rearrange channel
positions or alter channel numbering.
[Channel Scan Type] – Select the type of channels to be tuned.
[All] – All channels will be tuned.
[Only Encrypted Channels]Tunes only encrypted channels that
require a CAM module or CAM with a smartcard.
[Only Free Channels] – Only free channels will be tuned.
[Channel Store Type] – Selects the type of channels to be stored in the TV
memory after tuning.
[All] – All channels will be stored.
[Only Digital Channels] – Only TV channels will be stored.
[Only Radio Channels] – Only radio channels will be stored.
Tuning satellite channels (general)
This section provides guidance on how to tune channels from a specic
satellite, such as ASTRA 19.2E.
Before tuning satellite channels, make sure that the TV is in [Preferred
Satellite] mode:
1. Press the (quick settings) button, then select [Settings]
> [Channels & Inputs] > [Channels] > [Satellite] > [Channel
Installation Mode].
2. Select option [General Satellite].
To initiate the satellite scanning process, follow these steps:
1. Press the (quick settings) button, then select [Settings] >
[Channels & Inputs] > [Channels] > [Satellite] > [Satellite Re-scan].
2. Select [Next] to proceed with the scan or choose [More] to select
specic scan mode.
If you select [More], there are several types of satellite scan modes to
choose from. Select the one that corresponds to your satellite system:
[Single] – Scan the channels of a single satellite.
[Tone Burst] – Scan the channels from up to 2 satellites.
[DiSEqC 1.0] – Scan the channels from up to 4 satellites.
[DiSEqC 1.1] – Scan the channels from up to 16 satellites.
[DiSEqC 1.2] – Use this option if you have a satellite antenna with a
single axis motor.
[Unicable I] – Scan the channels from up to 2 satellites with up to 8
User Band Number.
[Unicable II] – Scan the channels from up to 4 satellites with up to 32
User Band Number.
3. Select the satellite you want to scan and press [OK].
4. Change the available settings if necessary:
[Satellite Status]This feature allows you to deactivate the tuning ability
for the currently selected satellite. In cases where you have the capability
to tune multiple satellites, but you choose not to tune the currently
selected satellite, you can utilize this option to disable it.
[Satellite selection] – Displays the name of the currently selected satellite.
Modication is not possible.
[Scan mode] – This option allows you to select how channels should be
scanned:
[Full] – Scan all channels on all available transponders on all possible
frequencies.
[Network] – Scan for channels on all available transponders. When a
homing channel is found, its Network Information Table (NIT) is read
and additional channels are quickly tuned based on it.
[Scan type] – Select the type of channels to be tuned.
[All] – All channels will be tuned.
[Only Encrypted Channels]Tunes only encrypted channels that
require a CAM module or CAM with a smart card.
[Only Free Channels] – Only free channels will be tuned.
[Store type] – Selects the type of channels to be stored in the TV memory
after tuning.
[All] – All channels will be stored.
[Only Digital Channels] – Only TV channels will be stored.
[Only Radio Channels] – Only radio channels will be stored.
[LNB congurations]View or set the LNB congurations for LNB Power,
LNB Frequency, Tone 22KHz, Signal Quality and Signal Level.
[Transponder] – Settings for tuning a single transponder.
[Signal Quality] – Shows the quality of the signal for the currently selected
satellite.
[Signal Level] – Indicates the strength of the signal for the currently
selected satellite.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp 43GL4460E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp 43GL4460E in de taal/talen: Engels als bijlage per email.

De handleiding is 2,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Sharp 43GL4460E

Sharp 43GL4460E Gebruiksaanwijzing - Deutsch - 24 pagina's

Sharp 43GL4460E Gebruiksaanwijzing - Français - 24 pagina's

Sharp 43GL4460E Snelstart handleiding - Alle talen - 100 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info