758502
5
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
05/2017
- 5 -
Copyright © 2017, Fast ČR, a.s.
EN Vacuum Sealer
User'smanual
Prior to using this appliance, please read the usersmanual thoroughly,
even in cases, when one has already familiarised themselves with
previous use of similar types of appliances. Only use the appliance in
the manner described in this user’smanual. Keep this user’smanual
in asafe place where it can be easily retrieved for future reference.
We recommend saving the original cardboard box, packaging
material, purchase receipt and responsibility statement of the vendor
or warranty card for at least the duration of the legal liability for
unsatisfactory performance or quality. In the event of transportation,
we recommend that you pack the appliance in the original box from
the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 Tilt-out lid
A2 Sealing strip
Creates astrong seal by
melting.
A3 Latch
serves to lock the lid in the
closed position.
A4 Top gasket
A5 Bottom gasket
A6 Vacuum chamber
A7 Rubber strip
A8 Button for turning air suction
from an external vacuum
container on and off.
A9 Air suction inlet
A10 Latch release button
is located on both sides of
the vacuum sealer.
A11 Hose for sucking air out of
external vacuum containers.
Note:
The appliance is supplied together with 5 vacuum sealer
bags from PA/PE material with dimensions of 20×30cm and
1 vacuum sealer roll from PA/PE material with dimensions
20×200cm.
DESCRIPTION OF THE CONTROL PANEL
B1 Operating mode setting LED
indicators
B2 STOP touch button
for ending operation
B3 MODE touch button
for setting the operating
mode:
NORMAL (standard) for
standard vacuum sealing,
GENTLE for gentle vacuum
sealing of loose foodstuffs.
B4 FOOD touch button for
setting the operating mode:
DRY for vacuum sealing
dry foodstuffs,
MOIST for vacuum sealing
higher moisture foodstuffs.
B5 SEAL touch button
for making astrong seal
with LED indicator signalling
the sealing time
B6 VAC/SEAL touch button
for creating avacuum and
making astrong seal
with LED indicator signalling
the vacuum sealing time
Note:
Certain models are equipped only with buttons B2, B5 andB6.
The appearance of touch buttons and indicators may differ
depending on the model.
WHAT IS THE PURPOSE OF AVACUUM SEALER
When stored in the normal manner, foodstuffs lose their flavour,
aroma and nutrients. Bacteria multiply, moulds form in these
foodstuffs, which leads to their spoilage. The vacuum sealer enables
one to create avacuum package, and the freshness of foodstuffs can
be extended by up to 5 times compared to standard storage methods
without requiring any preservation or other chemicals. Likewise,
vacuum sealing may also shorten marinating times, which usually
take several hours, down to only 20 minutes.
Vacuum sealing can also be used to protect various items against
the entry of water or insects.
VACUUM SEALER BAGS AND ROLLS
The vacuum sealer bags and rolls supplied with this appliance consist
of two layers that provide effective protection against the entry of air
and moisture. This enables one to store foodstuffs fresher for longer.
The inner layer is from PE material. The outer layer is made from PA
material. In these vacuum sealer bags, it is possible to heat foodstuffs
in amicrowave oven or boil in water.
Additional vacuum sealer rolls can be purchased under part number
SVX 300CL.
USING THE VACUUM SEALER
Connect the power cord to apower socket and tilt open the lid A1.
When the power cord is connected to apower socket, the indicators
B1 will be lit. The default operating mode setting is NORMAL and DRY.
1. SEALING FUNCTION
1.1 Fill the vacuum sealer bag with foodstuffs up to max. of its volume.
Insert the bag with the open side into the vacuum sealer so that its
edges extend past the rubber strip A7 by at least 1.5 cm. Check that
the place where the seal will be made is clean, dry and free of creases.
Push the lid A1 down firmly until an audible click is heard.
1.2 Press the SEAL button B5. The LED indicator of button B5 will be lit
and afirm seal will be made under the sealing strip A2. The sealing
process takes approximately 6to10seconds. As soon as the sealing
process is finished, the LED indicator of button B5 will turn off. To
release the lid A1, press buttons A10. Tilt open the lid A1, remove
the bag and check the strength of the seal.
Note:
When using the vacuum sealer role, it is necessary to first make
aseal that will form the bottom of the vacuum sealer bag.
The sealing process can be ended at any time by pressing the
STOP button B2.
2. VACUUM WITH SEALING FUNCTION
2.1 Fill the vacuum sealer bag with foodstuffs up to max. of its volume.
Insert the bag with the open side into the vacuum sealer so that its
edge is located inside the vacuum chamber A6. The bag must not
cover the air suction inlet A9.
2.2 Check that the place where the seal will be made is clean, dry and
free of creases. Push the lid A1 down firmly until an audible click is
heard.
2.3 Depending on the type of foodstuffs that are placed in the bag, set
the operating mode using buttons B3 and B4. Press the VAC/SEAL
button B6. The LED indicator of button B6 will be lit and the air
suction process will start automatically. When acomplete vacuum is
achieved, the air suction process will stop automatically and the LED
indicator of button B6 will turn off. The vacuum sealer will switch to
the sealing mode. This is indicated by the LED indicator of the SEAL
button B5 being lit. Astrong seal will be made under the sealing
strip A2. The whole process takes approximately 10to20seconds.
As soon as the sealing process is finished, the LED indicator of button
B5 will turn off. To release the lid A1, press buttons A10. Tilt open
the lid A1, remove the bag and check the strength of the seal.
Note:
When using the vacuum sealer role, it is necessary to first make
aseal that will form the bottom of the vacuum sealer bag.
In the event that an insufficient vacuum is being created, push
down on the lid A1 for ashort time during the vacuuming
process.
The air suction or sealing process can be ended at any time by
pressing the STOP button B2.
In the event that you do not wish acomplete vacuum to be
created inside the bag, you may manually switch to the sealing
mode by pressing the SEAL button B5.
Attention:
Allow hot foodstuffs to cool down before creating avacuum
package.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SVS 1010 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SVS 1010 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info