758951

Sencor STS 5070 Handleiding

5
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
06/2017
- 5 -
Copyright © 2017, Fast ČR, a.s.
EN Toaster
User'smanual
■ Prior to using this appliance, please read the user’smanual thoroughly,
even in cases, when one has already familiarised themselves with
previous use of similar types of appliances. Only use the appliance in the
manner described in this user’smanual. Keep this user’smanual in asafe
place where it can be easily retrieved for future reference.
■ We recommend saving the original cardboard box, packaging material,
purchase receipt and responsibility statement of the vendor or warranty
card for at least the duration of the legal liability for unsatisfactory
performance or quality. In the event of transportation, we recommend
that you pack the appliance in the original box from the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 Removable toasting rack
A2 Pair of toasting slots
A3 LED operation indicator
A4 Electronic timer
for 9 levels of toasting intensity
A5 LED display
A6 Removable crumb tray
There are two trays on the
underside of the appliance.
Each separate for one pair of
toasting slots.
A7 “Reheat” button
A8 “Cancel” button
A9 “Defrost” button
A10 Control lever with the “High
Lift” function for easy removal
of smaller bread products
A11 Anti-slip feet
A12 Power cord storage
compartment
BEFORE FIRST USE
■ Before rst use take the appliance and its accessories out of the
packaging material and remove all promotional labels and stickers from
it.
■ Wash the toasting rack A1 using warm water and a neutral kitchen
detergent. Then rinse it under running water and dry it thoroughly with
awiping cloth.
Attention:
Make sure that the toasting rack A1 is completely dry before
placing it on the toaster.
■ Before rst use, to remove any potential odours, the toaster must be
started empty at least three times with the maximum toasting intensity
set.
OPERATING THE APPLIANCE
■ Place the toaster on an even, dry and stable surface at a sucient
distance from surfaces of ammable materials as described in chapter
Safety instructions.
■ Fully unwind the power cord and connect the toaster to apower socket.
When not using the toasting rack A1, remove it. Only one slice of toast
bread, one slice of ordinary bread, half a bun or bagel, etc. may be
inserted into each slot A2. The bread slices must not be too thick so as
not to jam in the slots A2 and must not extend out of the toaster when
the control lever A10 is locked in the lower position.
Attention:
Do not place bread products that have butter, margarine, etc.
spread on them into the toaster.
■ Use the electronic timer A4 to set the toasting intensity in the range from
1 to 9. Low toasting intensity corresponds to levels 1 and 3. For medium
toasting intensity, set level 4 to 6, and for high toasting intensity, set level
7 to 9. Upon rst use, it is recommended to set the toasting intensity
to level 4 or 5. To toast another bread product, you can then choose
adierent toasting intensity level depending on the type of bread and
your taste preference.
■ Start the toaster by pushing down the control lever A10. The left lever
controls the left pair of toasting slots and the right lever controls the
right pair of toasting slots. The toasting process will automatically start
when the control lever A10 is locked in the lower position. Button A8
will be lit, the LED operating indicators A3 will be lit, and the set toasting
intensity level will appear on the display A5. The LED indicators A3 will
gradually turn o during operation.
Note:
Unless the toaster is connected to a power socket, the control
lever A10 will not lock in the lower position, and the toaster will
not start.
The toasting process can be stopped at any time during operation
by pressing button A8.
■ The toaster will turn o automatically and raise the inserted bread
product as soon as the toasting process is complete. The display A5,
LED indicators A3 and the backlight of button A8 will turn o. To toast
more bread products, remove the toasts from the toaster and repeat the
above described procedure.
Note:
The control lever A10 is equipped with a “High Lift” function that
lifts the bread product all the way up. This makes it easier to take
out smaller bread products.
Attention:
Never attempt to take out ajammed piece of bread or any other
bread product using aknife or another metal object. This could
lead to injury by electrical shock or damage the appliance. If bread
products become jammed inside the toaster, turn it o, disconnect
it from the power socket and allow it to cool down. Then carefully
remove the bread products.
■ After using the toaster, disconnect it from the power socket and allow it
to cool down.
Reheat toast function
■ This function makes it possible to heat up a toast without further
toasting. The setting on the timer A4 has no eect on this function.
■ Insert toasts into the slots A2 and push the control lever A10 down until
it is locked in the lower position. Button A8 will be lit, the LED operating
indicators A3 will be lit, and the set toasting intensity level will appear
on the display A5. To heat up atoast, press button A7. Button A7 will be
lit and the toast reheat mode will be started. The LED indicators A3 will
gradually turn o during operation.
■ The toaster will automatically raise the inserted bread products at the
end of the toast heating process. The display A5, LED indicators A3 and
the button backlights will turn o.
Note:
The toast reheating process can be interrupted at any time by
pressing button A8.
Toast frozen bread products function
■ Insert frozen bread products into the slots A2 and set the desired
toasting level. Push the control lever A10 down until it becomes locked
in the lower position. Button A8 will be lit, the LED operating indicators
A3 will be lit, and the set toasting intensity level will appear on the
display A5.
■ To toast frozen bread products, press button A9. Button A9 will be lit and
the toast frozen bread products mode will be started. In the rst phase,
the frozen bread products are defrosted, in the second phase they are
toasted. The LED indicators A3 will gradually turn o during operation.
■ The toaster will automatically raise the inserted bread products at the
end of the toasting process. The display A5, LED indicators A3 and the
button backlights will turn o.
Note:
The toast frozen bread products process can be interrupted at any
time by pressing button A8.
Note:
The reheat toast function and the toast frozen bread products
function cannot be set simultaneously.
Toasting rack
■ Place the rack A1 (one or two) on to the toaster as shown in gure A, and
then place the bread product (small baguette, bread roll or bun) that you
wish to toast on to it. Set alow toasting intensity in the range from 1 to 3
and push the control lever A10 down until it locks in the lower position.
The toasting process will start automatically. Button A8 will be lit, the
LED operating indicators A3 will be lit, and the set toasting intensity
level will appear on the display A5. The LED indicators A3 will gradually
turn o during operation.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor STS 5070 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor STS 5070 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Sencor STS 5070

Sencor STS 5070 Gebruiksaanwijzing - Nederlands - 6 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info