759891
6
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
EN-6
EN
Travel Steam Iron
SSI 1010GR
2017 12/2017
2. SETTING THE MAINS VOLTAGE SWITCH
Prior to connecting the iron to apower socket, the slider switch A7 must always be set to the voltage corresponding
to the voltage in the power socket to which you wish to connect the iron.
3. CONNECTING TO A POWER SOCKET AND SETTING THE TEMPERATURE CONTROL DIAL
Place the iron in the upright position on an even and stable surface and connect the power cord A1 to apower
socket.
Set the temperature control A9 according to the type of fabric that you wish to iron, see chapter Preparation
before ironing. The indicator light A8 will turn on. This signals that the soleplate A10 is heating up. When the
soleplate A10 heats up to the set temperature, the indicator light A8 will turn o. Now you may commence
ironing your laundry.
During rst use, aweak cracking sound caused by the expanding plastic may be heard. This is an entirely normal
event, which will disappear in ashort time.
While ironing, the indicator light A8 will intermittently turn on and o. This indicates that the set temperature is
being maintained.
First iron the laundry that requires the lowest temperature. This will save you time because the soleplate A10
heats up faster than it cools down.
If you iron some fabrics requiring ahigher temperature and then set alower temperature, it is necessary to wait
until the soleplate A10 cools down.
To prevent damaging its surface, do not move the soleplate A10 over sharp or hard items such as buttons or zips.
4. STEAM FUNCTION
The continuous steam function can be used when the water tank is lled with water. If you wish to iron with
steam, temperature must be set in the range from ●● to ●●●. Moving the steam emission control A5 toward
the symbol , variably increases the steam emission and vice versa. Setting the steam emission control A5 to
position , deactivates the steam function.
In the event that the steam function is set at the same time as the temperature control A9 is set to low temperature
, water may drip out of the soleplate A10.
Note:
The iron continuously emits steam only if you hold it in ahorizontal position. You can stop the release of
steam by standing the iron upright.
Attention:
Do not use the steam function for silk and synthetics so as not to damage the fabric.
5. STEAM IMPULSE FUNCTION
Press the steam impulse button A4 to generate astronger ow of steam, which can straighten out even crumpled
up textiles.
Only use the steam impulse function when the temperature control A9 is set to temperature ●●●. In order to use
this function, the water tank must be lled with water. If indicator light A8 turns on, wait until it turns o and only
then press the button A4. Wait at least 5seconds before pressing button A4 again.
The steam impulse function can also be used for vertical ironing, i.e. when ironing textiles hanging on coat
hangers, etc.
Attention:
Do not use the steam impulse function on silk and synthetics in order not to damage the fabric.
6. AT END OF USE
When you have nished using the iron, stand it upright and set the steam emission control A5 to position . This
will deactivate the steam function. Set the temperature control A9 to minimum and disconnect the power cord
A1 from the power socket and allow the soleplate A10 to cool down. After the soleplate A10 has cooled down,
clean the iron according to the instructions in chapter Cleaning and maintenance.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SSI 1010 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SSI 1010 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,24 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info