760095
5
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
EN-3
Getting ready to laminate
6.1. Site the machine so that there is enough space to insert the laminating pouches (in other words,
not right in front of a wall or other objects).
6.2. Insert the plug into an earthed power socket (220–240 V = domestic power supply).
6.3. Switch the machine on using the ON/OFF switch 1. The red power light 3 will come on.
6.4. Select either hot or cold lamination by ipping the HOT/COLD switch 2 to the desired position.
Note: Your laminator supports lamination of 75 mic and 125 mic pouch without mode-switching.
6.5. The green standby indicator 5 light appears as soon as the machine has reached the right
temperature. The preheating time can vary depending on the ambient temperature and air
humidity.
General tips on laminating
After laminating
1. Set the ON/OFF switch 1 to “off”.
2. Pull the mains plug from its socket.
3. Leave the machine to cool.
Cleaning the rollers
1. Switch on the machine.
2. Fold a sheet of A4 paper and insert this, folded edge rst, into the pouch feed tray 5. Keep
repeating this process until no more glue deposits cling to the paper.
Cleaning the machine
1. Always remove the mains plug from its socket before cleaning the machine.
2. Let the machine cool down.
3. Always clean the machine with a soft cloth. Use neutral cleansing agents, never abrasives.
How to laminate
8.1. Please note! Only take one pouch per lamination, as pouches stick tightly together. Place the
document that you wish to laminate between the two sides of the laminating pouch. Ensure that it
lies ush with the enclosed edge.
8.2. Insert the laminating pouch closed-edge- rst into the pouch infeed slot 5 on the back of the
machine. The rollers will automatically pull the pouch in and transport it to the pouch output slot
6 on the front of the machine. Don’t use force to pull out the samples. In the event of jamming,
see the ABS section
8.3. Let the pouch cool for a bit, and then it’s ready.
8.4. If the laminating pouch has not adhered properly to the paper, repeat the process.
Cold laminating
Please note that only pouches intended speci cally for cold lamination may be used.
Originals with a treated surface, such as fax thermopaper or Polaroid pictures, and papers with
surfaces that may be altered through heat should only be laminated using cold lamination. In these
cases, set the HOT/COLD switch 2 to position “COLD”.
Slide the foils, with the item to be laminated between them, into the feed slot 5.
Please note: After hot lamination, wait 20-30 minutes after ipping the HOT/COLD switch 6 to
<COLD> to allow the unit to cool down before you start cold laminating.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SLA 210 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SLA 210 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info