759996
8
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
EN-8
EN
Automatic rotating curling iron
SHS 0900GD
Copyright © 2020, Fast ČR, a.s. Revision 04/2020
Note:
If you change the temperature after the appliance has finished heating up, the ready
indicator will gradually light up on the display A6. When the curling iron heats up,
the ready indicator will be lit.
Note:
Alower temperature is suitable for fine, dyed and damaged hair. A higher
temperature is suitable for normal, thick and strong hair.
Setting the rotation speed of the cylinder
Repeatedly press button A10 until “R appears on the display A6.
Use the + or – buttons to set the desired rotation speed of the cylinder. The speed can be
set in the range from 1 to 5, where speed 1 is the lowest and speed 5 is the highest.
Setting the hair strand wound on time
Repeatedly press button A10 until “T appears on the display A6.
Use the + or – buttons to set the time for which the hair strand will remain wound on to the
cylinder A2. The time can be set in the range from 3 to 12 seconds.
Using the curling iron
1. Thoroughly comb out your hair before use.
2. Set the desired temperature, cylinder rotation speed and when necessary also the hair
strand wound on time.
3. Hold the curling iron with one hand vertically next to the hair strand.
4. Carefully wind ahair strand around the cylinder A2 and then press the rotate right button
A4 or the rotate left button A5. The tines will help the hair strand to automatically wind
on to the cylinder A2.
Note:
It is important for the rotate right button A4 or rotate left button A5 to be held
down for the entire winding time.
5. Once the whole (or as necessary only its part) hair strand is wound on to the cylinder A2,
release the rotate right button A4 or the rotate left button A5 and wait afew seconds for
the hair strand to heat up. If you have set the time for which the hair strand is to remain
wound up on the cylinder A2, abeep will be made after this time elapses. This indicates
that you should release the hair strand from the cylinder A2.
6. In order to release the hair strand from the cylinder A2, carefully pull the curling iron
downwards.
7. Repeat the entire process with the remaining hair strands.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SHS 0900 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SHS 0900 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info