760028

Sencor SHI 4500 Handleiding

5
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
- 5 - 06/2019Copyright © 2019, Fast ČR, a.s.
EN Hair straightening iron
User'smanual
■ Prior to using this appliance, please read the user'smanual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’smanual.
Keep this user'smanual in asafe place where it can be easily retrieved for future use.
In the event that you hand this appliance over to somebody else, make sure to also
include this user'smanual.
■ We recommend saving the original cardboard box, packaging material, purchase
receipt and responsibility statement of the vendor or warranty card for at least the
duration of the legal liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in the original box
from the manufacturer.
■ Carefully unpack the appliance and take care not to throw away any part of the
packaging before you find all the parts of the appliance.
DESCRIPTION OF THE APPLIANCE AND ACCESSORIES
A1 Display
A2 Hanging loop
A3 Swivel power cord end
A4 Main switch
A5 Increase temperature button
A6 Decrease temperature button
A7 Ironing plates with infra-red heat
indicators
A8 Ionisation function indicator
PURPOSE OF USE AND FEATURES OF THE HAIR STRAIGHTENING
IRON
■ The hair straightening iron is intended exclusively for straightening and styling
human hair. It must never be used for styling wigs, hairpieces, synthetic hair or for
straightening animal fur.
■ The iron is equipped with an automatic safety shut-off function, that turns it off after
60minutes of inactivity.
■ The surface of the ironing plates is coated with titanium and enables operating
temperatures from 100 °C to 230 °C. The temperature can be controlled in
10°Cincrements.
APPLICATION
TURNING ON AND SETTING THE TEMPERATURE
■ Connect the iron to apower socket. The display A1 will show OFF.
■ Hold down button A4 for longer than 3seconds. The appliance will beep and the
default temperature of 180°C will be lit on the display and the iron will start heating
up. The blue ionisation function indicator A8 and the infra-red plate heat indicators
A7 are lit.
■ The temperature can be adjusted in 10-degree increments in the range from
100°Cto 230°Cusing buttons A5 andA6.
Note:
If "888" appears on the display, this indicates that there is amalfunction of
the heat sensor or iron. If this happens, disconnect the iron from the power
grid and contact aservice centre.
TEMPERATURE LOCK FUNCTION
■ This function prevents accidental changes to the temperature while the iron is being
used. Activate the function by holding down button A5 for longer than 3seconds.
The text LOC will appear on the display and the set temperature will be locked, i.e.
no button will react when pressed.
■ Deactivate the function by holding down button A5 for longer than 3seconds. The
text LOC will disappear.
AUTOMATIC SHUT-OFF FUNCTION
■ If no action is taken after turning on the iron, i.e. no button is pressed, then for safety
reasons, the iron will turn off automatically after 60minutes of inactivity. It will start
again after button A4 is pressed.
Attention:
The automatic shut-off is intended only for cases, where you
forget to turn off the iron using button A4. Do not use the
automatic shut-off to intentionally turn off the iron.
TEMPERATURE DEPENDING ON HAIR TYPE
■ The suitable temperature for straightening hair depends on the hair structure.
Depending on the type of hair, an incorrectly selected temperature may cause the
hair to dry out, become brittle or in the worst case to burn. Therefore, first try ironing
at alow temperature (100°C) and set ahigher temperature only when necessary.
■ The information contained in the following table is for reference purposes only. It
may differ depending on hair type.
Hair type Temperature
Fine, damaged, discoloured, highlighted or dyed hair 100°Cto 150°C
Normal, lightly wavy hair 150°Cto 190°C
Very heavy, curly, unyielding hair 190°Cto 230°C
PROCEDURE FOR IRONING HAIR
■ Wash your hair thoroughly, dry it completely and brush through thoroughly so that
it is smooth and without knots.
■ Separate this prepared hair using clips into equally wide strands (about 5cm wide).
■ Start to iron the back part of the head at the lower strands of hair – at the root place
the strand of hair between the plates and gently press the handle of the iron. With
asliding motion pull the iron all the way to the ends of the hair.
■ Repeat the procedure for the same strand of hair until you achieve the desired
appearance.
■ Continue in the same way with the remaining strands of hair (first on the front part
of the head and ending at the sides).
■ Before the final combing, allow the hair to fully cool down.
Attention:
Do not touch the ironing plates - there is adanger of burns!
Do not leave the iron in the one spot for longer than
5seconds as hair could be burnt.
Use the iron only on healthy hair. Do not use the iron on oily,
stuck together or sweaty hair. On perm or coloured hair only
use the iron infrequently.
Tip:
Adjust the speed of movement of the iron on the hair strands according
to their character (fine hair is more sensitive to a hot surface and
requires asignificantly shorter ironing time than stronger hair).
TURNING OFF THE IRON
■ When you have finished ironing, turn off the iron by holding down button A4.
Abeep will be made and the display will show OFF.
■ Disconnect the iron from the power socket.
Attention:
Allow the iron to fully cool down before storing!
CLEANING AND MAINTENANCE
Attention:
Clean the ironing plates only after they have fully cooled
down!
No part of the iron may be submerged in water or washed
under running water!
■ To clean the outside parts of the iron and the ironing plates, use a fine cloth
dipped in lukewarm water. Do not use aggressive cleaning agents, paint thinners
or solvents. Using these solutions could damage the surface of the product. The
surface of the iron plates does not need any further cleaning.
STORAGE
When not using the iron for an extended period of time, do the following:
■ Clean the iron as described in chapter Cleaning and maintenance.
■ Place the iron in asafe, dust-free, clean and dry place that is out of reach of children.
TECHNICAL SPECIFICATIONS
Rated voltage range .................................................................................................... 100−240 VAC
Rated frequency........................................................................................................................50/60 Hz
Rated power ................................................................................................................................ 55-60 W
Temperature range .........................................................................................................100 to 230 °C
Electrical shock protection class ........................................................................................................ II
EXPLANATION OF TECHNICAL TERMINOLOGY
Safety class for electrical shock protection:
Class II – Electrical shock protection is provided by double or heavy-duty
insulation.
We reserve the right to change text and technical specifications.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SHI 4500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SHI 4500 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info