759172
7
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
- 7 - 05/2020
Copyright © 2020, Fast ČR, a.s.
EN Air Cooler
User'smanual
Prior to using this appliance, please read the user'smanual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’smanual.
Keep this user'smanual in asafe place where it can be easily retrieved for future use.
We recommend saving the original cardboard box, packaging material, purchase
receipt and responsibility statement of the vendor or warranty card for at least the
duration of the legal liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in the original box
from the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 Remote control signal receiver
A2 Control panel with display
A3 Horizontal flaps with manually
adjustable tilt
A4 Air outlets
A5 Vertical flaps
A6 Water level indicator with MIN and
MAX marks
A7 Integrated handle
A8 Storage space for the remote
control
A9 Washable dust filter
A10 Washable water filter
A11 Power cord
A12 3-litre removable water tank
A13 Water tank lock
A14 Travel wheels
A15 Remote control
A16 Cooling insert (2 pcs)
DESCRIPTION OF THE CONTROL PANEL
B1 On/Off button
B2 Fan speed setting button
B3 Cooling / humidification mode
button
B4 Operating mode selection button
B5 Automatic shut-off timer button
B6 Flap motion button
B7 Fan speed setting indicator lights
B8 Cooling / dehumidification mode
indicator light
B9 Operating mode indicator lights
B10 Timer indicator lights
B11 Flap motion indicator light
DESCRIPTION OF THE REMOTE CONTROL
C1 On/Off button
C2 Flap motion button
C3 Operating mode selection button
C4 Cooling / humidification mode
button
C5 Timer button
C6 Fan speed setting button
BEFORE FIRST USE
Before first use, take the appliance and its accessories out of the packaging material
and remove all promotional labels and stickers. Check that neither the appliance nor
any of its parts is damaged.
INSERTING AND REPLACING BATTERIES IN THE REMOTE
CONTROL
From the underside side of the remote control A15, slide out the battery
compartment and insert a3V CR2032 battery into it, see figure D. While inserting
the battery, maintain the correct polarity.
If the battery in the remote control A15 is flat, replace it with anew battery of the
same type.
If you decide not to use the remote control A15 for an extended period of time, we
recommend removing the battery. If the battery were to leak into the inner area of
the remote control A15, this could result in its damage.
Note:
Never put batteries in afire, short circuit them or damage them in any
way. Dispose of them ecologically at the end of their lifetime. Never throw
batteries out with communal waste.
OPERATING THE APPLIANCE
Installation
Locate the appliance on an even, dry and stable surface within reach of aproperly
grounded power socket.
To ensure sufficient air circulation, leave aclearance of at least 30 cm on all the sides
of the appliance.
Make sure that the appliance is properly assembled and connect it to a power
socket. The appliance will make a sound and switch to the stand-by mode. All
buttons except for the B1 button will be disabled.
Turning the appliance on / off
Press the B1 button to start the appliance. The appliance will beep and start
running in the default setting.
Default settings:
1) Fan mode set to the lowest speed. (When the appliance is started for the first
time, it will first run at medium speed for approximately 3 seconds and then
automatically switch to the low speed. If you turn on the appliance from stand-by
mode, it will again start at medium fan speed for approximately 3 seconds and then
automatically switch to the low speed, if this speed was set before it was turned off.)
2) Cooling mode is turned off.
3) Operating mode: NORMAL and the indicator light is lit.
4 The timer is turned off.
5) Vertical flap motion is turned off.
To turn off the appliance, press button B1 . The appliance will make asound
and switch to the stand-by mode. When the appliance is turned off to the stand-by
mode, the previous settings are stored in memory. This does not, however, apply
when the appliance is disconnected from the power socket.
Always turn off the appliance and disconnect it from the power socket when you
have finished using it.
Setting the fan speed
Button B2 serves to set the fan speed. Press button B2 and select the
desired fan speed in the following order: (low speed) - (medium speed) -
(high speed). Each time it is pressed, the respective indicator light will be lit.
Setting the cooling / humidification mode
Button B3 is used to turn the cooling/humidification mode on and off. Indicator
light B8 is lit to indicate that the mode is activated. The pump will start running.
Before starting this mode, check that the water in the water tank A12 is at least
at the minimum mark. To fill the water tank with water, proceed according to the
instructions contained in section "FILLING THE WATER TANK".
Note:
To prevent the pump from becoming damaged due to long term use, the
pump will automatically turn off after 10 hours of continuous operation in
the cooling / humidification mode.
Setting the automatic shut-off timer:
Button B5 serves to turn on the timer. Repeatedly press button B5 to
change the timer in the following order: 1H – 2H – 4H – 8H – off. Each time it is
pressed, the respective indicator light will be lit. If "off" is selected, no indicator light
will be lit. The automatic shut-off timer durations cannot be accumulated. When the
selected time elapses, the appliance will automatically switch to the stand-by mode.
Setting an operating mode
Button B4 serves to set the operating mode. Repeatedly press button B4
to select the operating mode in the following order: (NORMAL = normal mode)
- (NATURAL = natural breeze) - (SLEEP = sleep mode). Each time it is pressed,
the respective indicator light will be lit.
In the NORMAL operating mode, the fan speed is constant.
In the NATURAL operating mode, the air flow speed is controlled automatically
based on the selected flow speed. This achieves the natural breeze effect.
Progression of the mode when high fan speed is set
High speed
Medium
speed
Low speed
Fan stops
Progression of the mode when medium fan speed is set
High speed
Medium
speed
Low speed
Fan stops
Progression of the mode when low fan speed is set
High speed
Medium
speed
Low speed
Fan stops
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SFN 5011WH bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SFN 5011WH in de taal/talen: Engels als bijlage per email.

De handleiding is 0,52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info