759899
5
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
06/2017
- 5 - Copyright © 2017, Fast ČR, a.s.
EN Pedestal Fan
User'smanual
Prior to using this appliance, please read the user’s manual
thoroughly, even in cases, when one has already familiarised
themselves with previous use of similar types of appliances. Only
use the appliance in the manner described in this user’smanual.
Keep this user’s manual in a safe place where it can be easily
retrieved for future use.
■ We recommend saving the original cardboard box, packaging
material, purchase receipt and responsibility statement of the
vendor or warranty card for at least the duration of the legal
liability for unsatisfactory performance or quality. In the event of
transportation, we recommend that you pack the appliance in the
original box from the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 Horizontal oscillation toggle switch
A2 Motor unit with adjustable vertical tilt angle
A3 Panel with control buttons
0 – o, 1 – low speed, 2 – medium speed, 3 – high speed
A4 Screw for fastening the control panel to the extensible pole
A5 Inner extensible pole
A6 Inner extension lock
A7 Outer pole
A8 Cross base central connecting piece
A9 Cross base feet
A10 Buttery screw with washer
Serves to fasten the outer pole to the base.
A11 Motor unit shaft
A12 Rear protective grill with fastening clamps and acarry handle
A13 Rear protective grill fastening nut
A14 Fan blades with adiameter of 40 cm
A15 Fan blade fastening nut
A16 Front protective grill
Note:
The accessories include a screw and a nut for joining the
protective grills.
BEFORE FIRST USE
■ Take the appliance and its accessories out of the packaging
materials. Before disposing of the packaging materials, make sure
that no part of the appliance is missing.
ASSEMBLING AND DISASSEMBLING THE APPLIANCE
■ Before assembling or disassembling the appliance, make sure that
it is turned o and disconnected from the power socket.
■ Secure the feet A9 in the cross base central connecting piece A8.
Fit the outer pole A7 from above into the cross base connecting
piece A8 and fasten from underneath using the buttery screw
A10 (see g. B).
■ Use one hand to rmly hold the outer pole A7 and the other hand
to release the inner extension lock A6 by turning the locking
screw anticlockwise. Slide the inner pole A5 out all the way and
secure it rmly by tightening the locking screw clockwise.
■ Use a cross-head screwdriver to loosen screw A4. On to the
inner pole A5, slide the control panel A3 and secure it rmly by
tightening the screw A4.
■ Place the base with the attached control panel A3 on aclean,
even, stable and smooth surface. Place the rear protective grill
A12 against the front side of the motor unit A2 so that the shaft
A11 passes through the centre of the grill A12, so that the tabs
on the front side of the motor unit A2 t into the holes in the
central part of the rear grill A12 and so that the handle is above
the motor unit A2. Screw the nut A13 clockwise to secure the rear
protective grill A12 to the motor unit A2. Before tightening the
nut A13, make sure that the rear grill A12 has not moved and that
the alignment tabs are still in the holes.
■ On to the shaft of the motor unit A11 put on the fan blades A14
so that the shaft A11 properly slides into the centre part of the fan
blades A14. Push the fan blades A14 towards the motor unit A2
all the way. Now, check that the fan blades A14 turn freely, and
secure them in place by screwing nut A15 anticlockwise on to the
shaft A11.
■ Release the clamps along the perimeter of the rear protective
grill A12. Place the front protective grill A16 against the rear
protective grill A12 so that the front grill A16 ts into the
alignment hook in the bottom part of the rear protective grill A12
and so that the screw holes in the top part of the grills are aligned.
Fasten the released clamps along the perimeter of the grills. To
ensure astrong connection of the two grills, into the aligned holes
at the top of the grills it is necessary to screw in the supplied screw
and secure it with the nut.
■ Before putting the fan into operation, check that it is correctly
assembled and that the protective grills are rmly joined.
■ To disassemble, proceed in reverse sequence.
OPERATING THE APPLIANCE
Setting the speed and turning o the fan
Place the fan on an even, dry and smooth surface within reach of
apower socket. Connect the power cord to apower socket. To set
the air ow speed, use the buttons on the control panel A3. The
functions of the control buttons are described below:
0 – turn o the fan;
1– set alow air ow speed;
2 – set amedium air ow speed;
3– set ahigh air ow speed.
When you have nished using the fan, always turn it o and
disconnect it from the power socket.
Setting horizontal oscillation
■ The horizontal oscillation of the motor unit A1 can be set using
the toggle switch A2. To start the horizontal oscillation, push the
toggle switch A1 down. The motor unit A2 will oscillate from side
to side at an angle of approximately 90°.
■ To turn o the oscillation, pull the toggle switch A1 up. This will
turn o the oscillation.
Setting the vertical tilt angle of the motor unit
■ Before setting the vertical tilt angle of the motor unit A2, rst turn
o the fan. Set the desired angle of the motor unit A2 and then
you may start the fan again.
Note:
The motor unit A2 may only be tilted up and down in
alimited range. Do not set the tilt angle of the motor unit
A2 by force.
Setting the height of the fan
The height of the fan may be set in the range from 102 to 120 cm.
■ Turn o the fan before setting its height. Use one hand to rmly
hold the outer pole A7 and the other hand to release the inner
extension lock A6 by turning the locking screw anticlockwise.
Slide the inner extensible pole A5 in or out to set the desired fan
height. To lock the set height in place, tighten the locking screw
clockwise.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SFN 4031 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SFN 4031 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,86 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Sencor SFN 4031

Sencor SFN 4031 Gebruiksaanwijzing - Nederlands - 6 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info