688525
5
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
04/2017
- 5 -
Copyright © 2017, Fast ČR, a.s.
EN
Espresso Machine
User'smanual
Prior to using this appliance, please read the usersmanual thoroughly, even
in cases, when one has already familiarised themselves with previous use of
similar types of appliances. Only use the appliance in the manner described
in this user’smanual. Keep this user’smanual in asafe place where it can be
easily retrieved for future reference.
We recommend saving the original cardboard box, packaging material,
purchase receipt and responsibility statement of the vendor or warranty card
for at least the duration of the legal liability for unsatisfactory performance
or quality. In the event of transportation, we recommend that you pack the
appliance in the original box from the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 Cup warming plate
A2 Power indicator light
A3 Coffee brewing water
temperature indicator
A4 Steam release water
temperature indicator
A5 Coffee brewing and steam
release mode toggle button
A6 Brew head
A7 Portafilter with coffee spout
A8 Removable grate
A9 Removable drip tray
A10 Tilt-down lid with handle
A11 1.5-litre removable water tank
A12 Selection knob, 3 options
– brew coffee , stand-by
mode and steam release
A13 Boiler (not shown)
A14 Swivel steam nozzle
A15 Removable milk frothing
attachment
A16 ON/OFF switch
A17 Stainless steel filter for 1 cup
of coffee
A18 Stainless steel filter for 2 cups
of coffee
A19 Coffee measuring cup with
tamper
BEFORE FIRST USE OF THE APPLIANCE
1. Remove all packaging materials, protective film, promotional tags or labels
from the appliance.
2. Install the appliance on an even, dry and clean surface. Take the water
tank A11 out of the appliance and rinse it out with clean water with the
addition of asmall amount of neutral dishwashing detergent. Then rinse it
out thoroughly using clean water, dry it and put it back in its place.
3. Take out the removable drip tray A9 with grate A8, wipe with adampened
textile, wipe dry and insert it back into the bottom part of the appliance.
4. Wash the portafilter A7, coffee measuring cup A19 and the stainless steel
filters A17 and A18 under clean running water with an addition of kitchen
detergent. Then rinse with clean water and wipe dry.
5. Wipe the outer surface of the appliance with alightly dampened cloth and
then wipe it thoroughly dry.
6. Prior to brewing the first cup of coffee, run the appliance empty for
approximately 60 seconds, i.e. with the water tank A11 filled with water
but without coffee tamped in the filter. This will clean out the inner
components and the brew head A6. A sufficiently large container must
be placed underneath the portafilter A7 for the hot water to flow into.
Instructions for starting the appliance are provided in chapter Operating
the appliance.
OPERATING THE APPLIANCE
1. FILLING THE WATER TANK
1.1 Grasp the water tank A11 by the handle A10. Lift it up and remove it from
the rear part of the appliance.
1.2 Fill it up with cold water up to the maximum water mark, insert it back into
the appliance and tilt down the lid with handle A10. The water tank A11
must be securely seated in place in order for water to be pumped out of it
into the boiler A13.
Note:
The water that you pour into the water tank A11 should ideally be
at room temperature (approximately 25 °C). Water that is too cold,
could negatively affect the final taste of the coffee beverage.
Attention:
The water tank A11 has amaximum capacity of 1.5 litres of water.
Do not overfill it.
Never fill the water tank A11 with warm water, hot water or sparkling
water, or other liquids such as, for example, milk.
Do not fill the water tank A11 when it is inserted in the appliance.
There is adanger of splashing the appliance or overfilling the water
tank A11.
1.3 Do not leave any remaining water in the water tank A11 for longer than
one day. For brewing quality fresh coffee, it is necessary to use fresh water.
Otherwise, the resulting flavour of the coffee beverage may be negatively
affected.
2. TURNING ON THE APPLIANCE
2.1 Connect the power cord plug to apower socket. Make sure that the water
tank A11 is filled with fresh water, that the drip tray A9 and grate A8 are
installed in their place and that the knob A12 is set to the stand-by mode
position.
2.2 To turn on the appliance, set the switch A16 to the ON position. Indicator
A2 will be lit.
2.3 Underneath the brew head A6 place acup into which hot water will flow.
Make sure the button A5 is in the pressed out position that is intended for
the coffee brewing mode. Set the knob A12 to the coffee brewing position.
As soon as water starts flowing out of the brew head A6, set the knob
A12 back to the stand-by mode position. This step is performed after the
appliance is turned on to pump water from the water tank A11 into the
boiler A13. In the boiler A13, water is heated to the optimal coffee brewing
temperature.
3. PRE-HEATING THE APPLIANCE AND CUPS
3.1 Preparing aquality cup of espresso requires that the appliance, portafilter
A7, filter A17 or A18, and cups are preheated. This is done in the following
way.
3.2 Place empty coffee cups upside down on to surface A1 and allow them to
warm up.
3.3 Select filter A17 or A18 and insert it into the portafilter A7 so that it
securely slides in along the entire perimeter. Insert the portafilter A7
underneath the brew head A6 so that the handle is pointing to the left.
This position is marked with “INSERT on the front panel of the appliance. To
fasten the portafilter A7 to the brew head A6, turn the handle to the right
to the “LOCK” position.
3.4 Wait until indicator A3 is lit, and set knob A12 again to the coffee brewing
mode position. Hot water will start flowing out of the spout on the
portafilter A7 into the cup located under the spout. When the indicator A3
turns off, set the knob A12 back to the stand-by mode position. Remove
the cup containing the hot water. Now the pre-heating process is finished.
4. BREWING COFFEE
4.1 Take the portafilter A7 out of the appliance and dry the filter with apaper
towel.
4.2 Place the portafilter A7 on to an even surface and pour the corresponding
amount of ground coffee into the filter. The one-cup coffee filter A17 is
filled with asingle level measuring cup A19 of coffee. The two-cup coffee
filter A18 is filled with double the amount of coffee. One level measuring
cup A19 is equivalent to 7 g of ground coffee. Spread the coffee out evenly
inside the filter and gently tamp it down with the flat end of the measuring
cup A19.
4.3 Thoroughly clean ground coffee remains from the edges of the filter A17
or A18. Insert the portafilter A7 underneath the brew head A6 so that the
handle is pointing to the left. This position is marked with “INSERT” on the
front panel of the appliance. To fasten the portafilter A7 to the brew head
A6, turn the handle to the right to the “LOCK” position.
4.4 Place one or two preheated cups underneath the portafilter A7. Make sure
that the cups are located underneath the spout.
4.5 When the indicator A3 is lit, set knob A12 to the coffee brewing mode
position. Within afew moments, coffee will start flowing into the cups.
Note:
The indicator A3 may turn off while the coffee is being extracted.
This signals adecline in the water temperature in the boiler A13.
The indicator A3 will light up again as soon as the boiler A13 heats
the water up to the ideal coffee brewing temperature.
Once the required amount of coffee is in the cup, set the knob A12 to the
stand-by mode position. This completes the coffee extraction process. The
extraction time for acup of espresso should be between 20 and 30 seconds
and the volume should be approximately 20 to 30 ml.
4.6 If you do not fill the filter with ground coffee, you may simply pour just hot
water, for example for tea, hot chocolate, etc.
4.7 Before you start brewing another cup of coffee, first remove used coffee
grounds, clean out the filter according to the instructions contained in
chapter Maintenance and cleaning and pour out the water from the drip
tray A9. When returning the drip tray A9 to its place, push it all the way
against the back wall of the appliance.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SES1710BK bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SES1710BK in de taal/talen: Engels als bijlage per email.

De handleiding is 0,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Sencor SES1710BK

Sencor SES1710BK Gebruiksaanwijzing - Nederlands - 7 pagina's

Sencor SES1710BK Gebruiksaanwijzing - Deutsch - 8 pagina's

Sencor SES1710BK Gebruiksaanwijzing - Français - 8 pagina's

Sencor SES1710BK Gebruiksaanwijzing - Italiano - 7 pagina's

Sencor SES1710BK Gebruiksaanwijzing - Espanõl - 8 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info