758831

Sencor SBU 7790 Handleiding

5
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
10/2016
- 5 -
Copyright © 2016, Fast ČR, a.s.
EN Super Blender
User'smanual
Prior to using this appliance, please read the user'smanual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user'smanual. Keep
this user'smanual in asafe place where it can be easily retrieved for future reference.
We recommend saving the original cardboard box, packaging material, purchase receipt
and responsibility statement of the vendor or warranty card for at least the duration of
the legal liability for unsatisfactory performance or quality. In the event of transportation,
we recommend that you pack the appliance in the original box from the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 Inner cap
can be used to add ingredients to the blending jar while the blender is running.
A2 Outer lid with hole
After removing the cap, you may add ingredients into the blending jar while
blending or you may use the pusher attachment to speed up the blending process.
A3 2-litre blending jar
it is made from very durable plastic Tritan, which does not absorb avours or odours
and does not contain toxic Bisphenol A.
A4 Six blade assembly
it is an integral part of the blender jar.
A5 Safety mechanism
prevents the blender from being turned on when the blending jar is not correctly
seated on the motor unit.
A6 Silicone pad
A7 Motor unit
A8 Control panel with display
A9 Anti-slip feet
A10 Handle
A11 Pusher attachment
its length is designed in such away that after being inserted into the hole in the
outer lid, it will not come into contact with the blade assembly.
A12 Cleaning brush
B1 Touch button +/– for setting blending time from 5 seconds to 6 minutes
B2 LCD display
shows blending time and speed.
B3 Touch button for setting operating mode “Flour”
B4 Touch button for setting operating mode „Smoothie”
B5 Touch pulse button for running the blender in short bursts at maximum speed
B6 Touch button +/– for setting speed from 1 to 8
B7 Touch button for setting operating mode „Nut milk”
B8 Touch button for setting operating mode “Fruit juice”
B9 Touch button for setting operating mode “Cream soup”
B10 Touch button for setting operating mode „Milkshake”
B11 Touch button START
serves to start the blender.
B12 Touch button POWER
serves to turn the blender on and o or to stop the blender.
PURPOSE OF USE AND APPLIANCE FEATURES
■ This multifunction blender represents a revolutionary solution in food processing.
Within afew short moments you will prepare awhole range of meals and beverages,
such as fresh nutritious drinks, milkshakes, creamy soups, sauces, spreads, blended
baby food; you will grind meat, nuts or grains, or create nut or soya milk, crushed ice or
outstanding creamy ice cream or sorbets.
■ Thanks to its powerful 1 800 W motor, this blender will handle even larger pieces of fruit
and vegetables, including soft kernels and peels. In this way, you will give your body the
valuable nutrients that are found in the pulp, kernels and peels in the form of an easily
digestible nutritious drink without having to laboriously cut the fruit and vegetables
into small pieces in advance. The pusher attachment will make blending large food
pieces easier and will speed up the blending of frozen foods to prevent them from
thawing. The two-part lid enables the addition of ingredients into the blending jar while
blending or the preparation of hot meals in the blending jar thanks to steam release
holes in the lid. Its anti-slip feet provide stability to the blender during its operation.
BEFORE FIRST USE
1. Take the appliance and its accessories out of the packaging materials.
2. Thoroughly wash all parts intended for contact with food, the (inner cap A1, outer lid
A2, blending jar A3 with blade assembly A4, and the pusher attachmentA11, using
warm water and aneutral kitchen detergent. Then rinse them with clean water and dry
thoroughly with ane wiping cloth.
Attention:
When cleaning the blending jar A3, be very careful not to injure yourself on the
sharp edge of the blade assembly A4.
ASSEMBLING AND DISASSEMBLING THE APPLIANCE
1. Before you start assembling or disassembling the appliance, check that the motor unit
A7 is turned o and disconnected from the power socket and that the rotating parts
have come to acomplete stop.
2. Place the motor unit A7 on a stable, even, dry surface, for example on a kitchen
countertop. Seat the blending jar A3 on to the motor unit A7. The blender is equipped
with a safety mechanism A5 that will prevent it from being turned on unless it is
correctly assembled.
3. Place the outer lid A2 on to the blending jar A3 and rmly push it down along its entire
perimeter.
4. Insert the inner cap A1 into the outer lid A2 and turn it all the way clockwise. This will
lock it in place.
5. To disassemble proceed in the reverse sequence.
OPERATING THE APPLIANCE
1. Make sure that the motor unit A7 is turned o and disconnected from the mains power
socket. Place the ingredients that you wish to blend into the blending jar A3. Assemble
the blender according to the instructions in the chapter Assembling and disassembling
the appliance.
Attention:
To achieve optimal results, the blending jar should be lled to at least of
its capacity.
The maximum capacity of the blending jar A3 is 2 litres. Do not ll it past the
maximum mark.
If you wish to blend hot liquids, prepare soya milk or use the pusher attachment
A11 while blending, do not ll the blending jar A3 to more than .
2. Connect the power cord to apower socket. The control panel A8 lights up for ashort
moment. Then the blender switches to stand-by mode. Button B12 starts ashing. To
turn on the blender, press button B12. The preset operating mode touch buttons will
light up and the blending time 00:00 and speed level 4 will appear on the display.
3. To select apreset operating mode, use the touch buttons B3–4 andB7–10. You will nd
an overview of all the operating modes in chapter Quick guide to processing ingredients.
To start the blender, press button B11. In all the operating modes, the blending speed
and duration are automatically regulated. While blending, we recommend to use your
hand to hold down the jar from above. After the preset blending time has elapsed, an
acoustic signal will be made and the blender will automatically stop running. If you wish
to stop the blender sooner, press the button B12. After being idle for two minutes, the
blender will automatically switch to the stand-by mode. The control panel with display
A8 will turn o and the button B12 will start ashing.
4. If you do not wish to take advantage of the available preset modes, you may use buttons
B1 and B6 to set the blending time and speed manually.
5. The pulse button B5 is used for running the blender at maximum speed in short
intervals. The blender will run as long as the button B5 is pushed down. The maximum
continuous operating time in this mode is 1 minute.
6. While blending or after pausing, you may add ingredients into the blending jar A3
through the hole in the lid A2. While blending hot liquids and meals, the inner cap A1
must remain locked in place.
7. If while blending, the ingredients are not circulating inside the blending jar A3, remove
the inner cap A1 and use the pusher attachment A11 to push the ingredients towards
the blade assembly A4. The pusher attachment A11 is designed in such away that after
being inserted into the hole in the outer lid A2, it will not come into contact with the
blade assembly A4. Never put the pusher attachment A11 into the blending jar A3
unless it is closed with the outer lid A2.
Attention:
The maximum operating time is 6 minutes. Then allow it to cool down for 5
minutes. After three consecutive cycles allow the appliance to cool down for
15 minutes.
To avoid overloading the motor, do not use the pusher attachment A11
continuously for longer than 1 minute.
8. If ingredients stick to the blade assembly A4 or the inside walls of the blending
jar A3, switch it o and unplug it from the power supply. Make sure that the blade
assembly A4 has stopped rotating. Carefully remove the blending jar A3 from the
motor unit A7. Take o the lid, and using aplastic spatula, clean the blade assembly
A4 and the walls of the blending jar A3. Put the lid back on and seat the blending
jar A3 back on to the motor unit A7. Plug the power cord into apower socket and
continue blending.
9. After you nish using it, disconnect the blender from the power socket. Check
that the blade assembly A4 has stopped rotating and take the blending jar A3
o the motor unit A7. Use aplastic spatula to remove food from the blending jar
A3. Disassemble and clean the appliance according to the instructions in chapter
Cleaning and maintenance.
BUILT-IN THERMAL FUSE
■ The thermal fuse protects the motor against overheating. If the appliance automatically
turns o during operation, unplug the power cord from the power socket. Take the
blending jar A3 o the motor unit A7 and check that the blade assembly A4 is not
blocked by ingredients inside of the blending jar A3. Wait approximately 15 minutes
until the motor unit A7 cools down. Then you may continue using the blender.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SBU 7790 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SBU 7790 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Sencor SBU 7790

Sencor SBU 7790 Gebruiksaanwijzing - Nederlands - 6 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info