528681
4
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
2.Explanation of the Liquid Crystal Display
[1] Measuring Mode Icons
Ambient (see page 10)
Auto-Reset Cordless Flash (see page 15)
Cord Flash (see page 13)
[2] Incident/ Reflected Spot Function Icons (see page 6)
Lights when in Incident mode
Lights when in Reflected Spot mode
[3] ISO Display
ISO Displays ISO film setting
Displays second ISO film setting when ISO 2 button is depressed
[4] +/- Compensation Indicator
Lights when +/
-
Compensation is set
[5]
Digital aperture value, Aperture Priority, EV Brightness Difference, Average function, EV display
lights when in Aperture Priority (f/stop) mode (see page 10)
lights When Using brightness difference function (See Page 20)
lights when using Averaging function (see page 19)
lights when using EV mode (see page 11)
[6] Analog Aperture and Memory Scale
Displays marks at apertures indicating full or half f/stop values for measurement, memory, average
values
[8]
Battery Power Indicator (see page 4)
[9] Memory / Multiple Flash Indicator Display
lights when reading is memorized (see page 19)
lights when in Multi (cumulative) flash measurement mode (see page 16)
-3-
3. Before Using
1. Attach the strap
Attach the Strap 26 by passing the small end loop through the
eyelet 9 and passing the other end of strap through it.
WARNING
Please place in a location where an infant cannot reach and accidentally get the strap
wrapped around his neck. There is danger of strangulation.
2. Inserting the battery
Requires one 1.5 v AA size battery. Accepts any of the
following types:
Manganese battery (R6P)
Alkaline battery (LR6)
Lithium battery (FR6)
1. Open the Battery compartment cover latch 21, and re-
move the Battery compartment cover 20 .
2. Insert the battery, observing the polarity with the +,- marks
in the battery chamber.
3. Align the tabs of the Battery compartment cover with the
notches in the back of the meter, and press down to close
the Battery cover latch.
NOTE:
Nickel cadmium (NiCad) and nickel hydroxide (NiH) rechargeable batteries cannot be
used.
To prevent loss of All-weather seal, be careful that dirt does not get stuck on the rubber
seal and that the seal is not damaged.
Remove battery if meter is not used for an extended period. Batteries can leak and
damage the exposure meter. Dispose of used batteries properly.
If the LCD does not light, check that the battery capacity is sufficient, and check that the
battery positive and negative terminals are not reversed.
3. Checking battery capacity
• When the Power button 7 is ON, the battery power indicator on the LCD is lit.
(Lit) Battery power level is good.
(Lit) Battery power level is low. Have a spare battery ready.
(Blinking) Replace battery immediately.
Reference:
If the Measuring Button is pressed continuously, the battery life at normal room
temperature will be as follows:
Manganese battery approximately 10 hours
Alkaline battery approximately 20 hours
Lithium battery approximately 35 hours
We recommend you always have a spare battery on hand.
-4-
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sekonic L-508 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sekonic L-508 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,62 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Sekonic L-508

Sekonic L-508 Snelstart handleiding - English - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info