757537

Seiko S351 Handleiding

5
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
■HOW TO USE THE TIMER  「TIMER」
分時 秒
Mode selector
Button
Button
・The timer can be set for up to 99 hours, 59 minutes and 59 seconds in one second
increments.
・Once the timer is set, the set time is stored in memory and can be used repeatedly
unless it is canceled.
・The timer can be set either by entering a time with keys or by recalling the
calculation result obtained in the time calculation mode.
・The remaining time is displayed in one second increments, and the time elapsed
from the start of the countdown can also be displayed while the elapsed time
display key is kept pressed.
・After the set time is up, the timer continues counting to show the time elapsed from
the end of the countdown, with “−” sign attached before the digits, for example, “0”,
“−1”, “−2”, and so on.
Turn the mode selector to set the knob to “TIMER”.
If the timer is counting, press button to stop the timer and then press to reset it.
(The time set previously will be displayed.)
Press the clear/clear entry key, and then, use the number entry and time keys to
enter the desired time. The timer can also be set by pressing the recall key to recall
the calculation result obtained in the time calculation mode.
Ex. 1) To set 3 minutes and 15 seconds:
[C/CE] [3] [1] [5]Or [C/CE] [3] [分 (MINUTE)] [1] [5]
(For details, refer to “■ HOW TO USE THE TIME CALCULATION MODE”.)
Timer setting
1
3
2A
B
AB
3
Notes:
･ By pressing the clear/clear entry key after the timer is reset, the
 set time stored in memory is canceled and the digits are reset
 to “0′00″”.
･ The timer counts down up to 100 hours in total from the start of
 the countdown and stops. If the timer is set to count down 5
 minutes and continues counting down after the set time is up,
 for example, it will automatically stop when “-99:55′00″” is
 displayed.
 Press button  or  to reset the timer. The time previously set,
 “5′00″” will be shown.
〈To check the time elapsed from the start of the countdown〉
 While the elapsed time display key is kept pressed, the time
 elapsed from the start of the countdown is displayed.
･ When the elapsed time key is released, the remaining time is
 displayed again.
･ While the elapsed time display key is kept pressed, the time
 shown on the display increases in one second increment.
･ While the timer is stopped, the time elapsed from the start of the
 countdown is displayed while the elapsed time display key is
 kept pressed.
Timer operation
Ex. 2) To recall the calculation result:
[C/CE] [Call]
The calculation result obtained in the time calculation mode will be displayed.
Notes:
・Even if the clear/clear entry key is not pressed, the time can be entered and set for the timer.
・A negative calculation result obtained in the time calculation mode can be displayed for the
timer by pressing the recall key. The timer, however, will not count down the time.
・The arithmetic operation keys ([＋], [−] and [＝]) does not work in the timer mode.
To start or stop the timer, press button  . Restart and stop of the timer can be repeated by
pressing the button. The timer restarts counting down from the time shown on the display.
Notes:
・When the timer is stopped, “STOP” and “ ″” marks are displayed.
・While the timer is counting down, “ ″” mark is not displayed.
・When a negative time (a time having a minus sign) is set for the timer and button  is
pressed to start the timer, the error mark “Error” is displayed. In that case, press the
clear/clear entry key to reset the digits to “0′00″” and enter a proper time.
After the set time is up, the timer continues counting down to show the time elapsed from the
end of the countdown, with “−” sign attached before the digits, for example, “0”, “–1”, “–2”, and
so on.
When the timer is stopped and button   is pressed, the timer is reset and the time
previously set is displayed. The set time can be used repeatedly unless it is canceled.
B
B
2
A
AB
Notes:
･ By pressing the clear/clear entry key after the timer is reset, the
 set time stored in memory is canceled and the digits are reset
 to “0′00″”.
･ The timer counts down up to 100 hours in total from the start of
 the countdown and stops. If the timer is set to count down 5
 minutes and continues counting down after the set time is up,
 for example, it will automatically stop when “-99:55′00″” is
 displayed.
 Press button  or  to reset the timer. The time previously set,
 “5′00″” will be shown.
〈To check the time elapsed from the start of the countdown〉
 While the elapsed time display key is kept pressed, the time
 elapsed from the start of the countdown is displayed.
･ When the elapsed time key is released, the remaining time is
 displayed again.
･ While the elapsed time display key is kept pressed, the time
 shown on the display increases in one second increment.
･ While the timer is stopped, the time elapsed from the start of the
 countdown is displayed while the elapsed time display key is
 kept pressed.
AB
■HOW TO USE THE STOPWATCH  「STOP-W.」
・The stopwatch can measure up to 99 hours 59 minutes and 59 seconds in one second increments.
 After 100 hours, it will start counting again from “0” and continues counting.
・Split measurement is possible.
・The stopwatch can be set to count from a desired time up to 99 hours 59 minutes and 59 seconds
 in one second increment.
・The starting time can be set by entering a time with the number entry and time keys or by recalling
 the calculation result obtained in the time calculation mode.
 Turn the mode selector to set the knob to “STOP-W.”.
 If the stopwatch is counting, press button  to stop it and then
 press button  to reset it.
・To start and stop the measurement, press button  .
 Restart and stop of the stopwatch can be repeated
 by pressing the button. The accumulated elapsed
 time measurement is possible.
Start
↑
Restart and stop of the stopwatch can
be repeated by pressing button  .
To start the measurement from the desired time
･ By entering a desired time, the stopwatch can count from
 the set time instead of “0”, for example, 3 minutes and 15
 seconds. In that case, the stopwatch displays the elapsed
 time added by the set time.
･ The starting time can also be set by recalling the calcula-
 tion result obtained in the time calculation mode.
 If the stopwatch is counting, press button  to stop it and
 then press button  to reset it.
 Press the number entry and time keys to enter the
 desired time, or press the recall key to recall the calcula-
 tion result obtained in the time calculation mode.
 Ex. 1) To set 3 minute and 15 seconds:
   [C/CE] [3] [1] [5]
    or
   [C/CE] [3] [分 (MINUTE)] [1] [5]
 (For details, refer to “■ HOW TO USE THE TIME CAL-
 CULATION MODE”.)
 Ex. 2) To recall the calculation result:
   [C/CE] [Call]
   The calculation result will be displayed.
AB
1
2
Standard measurement
Stop
A
B B
Restart Stop
B
Stop
B
Reset
B
· · · ·
A
B
・The split time measurement function is
 convenient in checking the elapsed time
 while the measurement is in progress.
Start
↑
Measurement and release of the split time
can be repeated by pressing button  .
Split time measurement
Split
AAA
A
B
Split
release Stop
B
Reset· · · ·
A
1
2
B
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Seiko S351 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Seiko S351 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,32 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info