757419
26
Verklein
Vergroot
Pagina terug
1/27
Pagina verder
English
English
50 51
Condition Solutions
Misalignment
of the date
The reception results are
successful and the precise
time is displayed, but the date
is not correctly displayed.
Set the date to the preliminary position “1” (the 1st).
Misalignment
of the day
The reception result
display confirms successful
reception, and the correct
time is displayed, but the
wrong day is displayed.
Check if the day is set to the correct preliminary position “S”(Sunday). If
not, correct the preliminary position for day.
Wrong
display of the
sub dial
The sub dial is set to the
time shown by the main
watch, but the sub dial
displays the wrong time.
Refer to “ABOUT SUB DIAL”.
Operation
The crown or buttons
cannot be operated.
Sufciently charge the watch until it starts moving at one-second intervals.
When the date hand is moving right after a setting is carried out by a
crown or button operation, after the date stops, the crown and buttons can
be operated.
You get lost in the middle
of the operation.
1. If the crown is pulled out, push it back in.
2. The watch will resume its normal one-second interval movements
within 9 minutes.
3. Start the setting procedure from the beginning.
Others
Blur on the dial glass persists.
Contact the retailer from whom the watch was purchased.
For the solution of troubles other than the above, consult the retailer from whom the watch was purchased.
IN CASE OF AN ABNORMAL MOVEMENT
In the case that the watch moves abnormally or that the watch does not move at
one-second intervals even after the battery is fully charged, perform the procedures
from 1. to 3. and then set the preliminary positions and select the time zone.
(NOTE)
First, press Button B, and subse-
quently press Button A while holding
down Button B so as to press both of
them successfully.
1.
3.
Button A
2.
Press for
3 seconds
Button B
2.
Press for
3 seconds
0 1 2
HOW TO RESET THE BUILT-IN IC
1. Pull out the crown to the second click.
The second hand stops at the 0-second position.
2.
Press and hold Buttons A and B at the same time
for 3 seconds, and then release them.
Within 5 seconds after releasing the buttons, the second
hand makes a full rotation and stops pointing to the
0-second position. Then the hour and minute hands will
start to move and stop pointing to 12 o’clock 0 minutes.
3.
When all the hands stop pointing to 12 o’clock
0 minutes and 0 seconds, push the crown back.
The second hand starts moving from 12 o’clock 0
minutes and 0 seconds.
After the built-in IC is reset, the watch is set to the time zone LON. After completion of a system reset,
perform the following operations.
PRELIMINARY POSITIONS P. 42
HOW TO SELECT THE TIME ZONE P.11
26

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Seiko 8B63 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Seiko 8B63 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info