Handleiding Seiko 8B54 (pagina 10 van 12) (Engels)

757420

Verklein

Vergroot

Pagina terug

1/12

Pagina verder

167

Theoperationisnowcompleted.

Push the crown back.

Pushthe

crownback.

※Relockthecrown.

→P.10 7

※Ifthedayoftheweekremainsincorrecteven

afterasuccessfulradiosignalreception,the

preliminarypositionofthedayhandmaybe

misaligned.

→

Howtocorrectthepreliminarypositions

P.16 9

Troubleshooting

012

166

Thewatchentersthemanualdayof

theweeksettingmode.

Keep pressing down the Button A (for 3

seconds) until the second hand moves

to point to the 55-second position.

ButtonA

for3seconds

Press the Button B to set

the day of the week.

Toadvanceoneday

Pressthebuttononceandrelease.

Toadvance

rapidly

Keeppressingdownthebuttonforlongerthan2seconds.

Pressthebuttononceagaintostop.

ButtonB

※Turningthecrownwillnotmovethehand.

※Whilethedayoftheweekismoving,the

buttoncannotbeoperated.

※Thedayoftheweekhandcanonlymove

forward.Itcannotmovebackward.

※

PresstheButtonB

withyourfingeror

withanobjectwith

alongtaperedtip.

　→P.10 6

Troubleshooting

BSB8B54 p095-188 欧文.indd 166-167 19.11.6 11:31:42 AM

169

How to correct the preliminary positions

■ Setting the preliminary position of the date, day hand, hour

and minute hands

The preliminary position of the date is the “ 1st.”

The preliminary position of the day hand is “M.”(Monday)

The preliminary positions of the hour and minute hands are “0:00 AM.”

Whenthenumericalnumberofthedateisnotlocatedatthecenterofthewindow,it

canbecorrectedbythesameproceduresasmentionedabove.

To correct the preliminary positions, perform the operation on the next page.

When the preliminary positions are incorrect, the correct date, day of the week

or time cannot be displayed even if the watch receives radio signals.

In such a case, by correcting the preliminary positions, wrong date or day

indication, loss or gain of the time can be corrected.

Troubleshooting

168

Troubleshooting

Preliminary position

When the watch is unable to display the precise time date or day even if it successfully receives

a radio signal with the correct time zone setting, the preliminary position may be misaligned.

Thepreliminarypositionmaybemisalignedduetothefollowingreasons.

　･

IInthecaseofhavingastrongimpact:Misalignmentofthetimeanddatemayoccurwhendroppingorhittingthewatch.

　･

Inthecaseofamagneticinuence:Misalignmentofthetimeanddatemayoccurwhenbringingthewatchclosetoanobjectwhichgeneratesmagnetism.

　Exampleofcommonmagneticproductsthatmaya󱐯ectwatches.　P.143

Whencomparingthestateof“MisalignedPreliminaryHandPosition”tothatofaweightscale,itislike“ascale

whichisunabletodisplaythecorrectweightbecauseitsneedleisnotsettothezeropositionbeforeweighing.”

Thehour,minute,andsecondhandshavean“AutomaticHandPositionAdjustment

Function,”whichautomaticallycorrectsanincorrectpreliminaryposition.

AutomaticHandPositionAdjustmentFunctionactivatesonceaminuteforthesecond

handandat12:00bothfortheAMandPMforthehourandminutehands.

※

Thisfunctionworkswhenthepreliminaryhandpositionismisalignedduetoexternalfactorssuchasstrongimpactormagnetic

inuence.Itdoesnotworktoadjustaccuracyofthewatchorslightdeviationswhichmayoccurduringthemanufacturingprocess.

■

Automatic Hand Position Adjustment Function (Function to automatically adjust the preliminary position of the hour and minute hands)

■ Setting the preliminary position of the date and the day

Sincethepreliminarypositionofthedateandthedayisnotautomaticallyadjusted,itmustbeadjustedmanually.

→Settingthepreliminarypositionofthedate　P.169

BSB8B54 p095-188 欧文.indd 168-169 19.11.6 11:31:43 AM

171

ボタンB

1回押すと

少し進む

Within 20 seconds after the

date stops, press the Button

B to set the date to “ 1.”

2 3



Makesurethatthenumericalnumber“1”

islocatedatthecenterofthedatewindow.

※

If“1”isalreadydisplayedinthedatewindow,moveontotheprocedure③.

Keep pressing down the Button A (for

3 seconds) until the second hand stops

pointing to the 55-second position.



Thewatchentersthepreliminaryposition

settingmodefordayoftheweek.

ButtonAfor

3seconds

ButtonB

Toadvance

rapidly

Keeppressingdownthebuttonforlongerthan2seconds.

Pressthebuttononceagaintostop.

Tone-tune

Keeppressingdownthebuttonaslongasyouwanttoadvancethenumericalnumber.

Troubleshooting

Continued on the next page.

170

Within 20 seconds after

procedure ① is completed

and the date stops, start the

operation of procedure ② .

※Ifthewatchisleftuntouchedfor

20secondsafterthedatestops,

thewatchautomaticallyreturns

totheTIMEdisplaymode.Ifthis

happens,restarttheoperationfrom

procedure①.

■ Setting the

preliminary positions

of the date, day hand,

hour and minute

hands (Continued)

Keep pressing down the Button A and B (for 4 seconds) at the same

time until the second hand stops pointing to the 13-second position.

※First,presstheButtonB,andsubsequentlypressthe

Button A whilekeepingholdingdowntheButtonB so

astopressbothofthemsuccessfully.

※

Whilethedateismoving,thebuttoncannotbeoperated.

※Donotpullthe

crownout.

※

PresstheButtonB

withyourfingeror

withanobjectwith

alongtaperedtip.

→P.10 6



Thewatchentersthepreliminarypositionsettingmode

fordate.Thedatewillstarttomoveandstopatthe

preliminaryposition.

ButtonA

ButtonB

Troubleshooting

PressSimultaneously

for4Seconds

BSB8B54 p095-188 欧文.indd 170-171 19.11.6 11:31:43 AM

76 Press the Button B once

and release it.

After completing the operation, leave

the watch untouched for 20 seconds.

Thewatchautomaticallyexitsthe

preliminarypositionsettingmode,

andthesecond,hourandminute

handsstartmoving.

WhenthewatchreturnstotheTIME

displaymode, checkif thetime, date

anddayoftheweekareallcorrect.

Ifthetime,dateanddayoftheweek

arenotcorrect,manuallysetthem.

Adjustingthetimeanddatebyreceivingaradiosignal

Howtoconductmanualreception→P.156

Whenthewatchisunabletoreceivearadiosignal

Howtomanuallysetthetime→P.160

Howtomanuallysetthedate→P.162

Howtomanuallysetthedayoftheweek→P.165

Press

theButton

Bonce



Thehourandminutehandsstartto

moveandstoppointingat“0:00am.”

173

Troubleshooting

Press the Button B to set the

day hand to point to “M.”

Makesurethatthedayhandissetto

pointto“M.”

ButtonB

Keep pressing down the Button A (for 3 seconds) until

the second hand stops pointing to the 0-second position.



Thewatchentersthepreliminaryposition

settingmodeforhourandminutehands.

※

Ifthehourandminutehandsarealreadyindicatingthecorrecttime,

moveontotheprocedure⑦.

ButtonAfor

3seconds

172

Toadvance

rapidly

Keeppressingdownthebuttonforlongerthan2seconds.

Pressthebuttononceagaintostop.

Tone-tune

Keeppressingdownthebuttonaslongasyouwanttoadvancethedayhand.

Troubleshooting

※Ifthedayhandisalreadypointingto“M”,

moveontotheprocedure⑤.

BSB8B54 p095-188 欧文.indd 172-173 19.11.6 11:31:44 AM

Seiko 8B54 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info