779969
9
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
ENGLISHENGLISH
Please be aware, to prevent damage to the frame and cables there should be minimum cable
clearance between the bottom of the bottom bracket and the cables.
The measurement should be a minimum of 25mm taken in the centre line of the bottom
bracket, as indicated in the image.
BB STANDARDS/FD MOUNTING DETAILS
The SCOTT SPARK has a Press fit PF92 bottom bracket with an inner diameter of 41mm, this
is a press fit system and special tools are required for removal and refitting, please contact
your SCOTT dealer for assistance.
The SCOTT SPARK (non RC models) uses a high direct mount side swing front derailleur
only, this must be used with the use of an FD adaptor plate.
It is not possible to mount a front
derailleur to RC frames/bikes.
ADJUSTMENT
We recommend all adjustments are carried out by your local authorized SCOTT dealer but
basic maintenance and checks should be done regularly before each ride as described in the
general manual that was supplied with your bike.
Please pay attention to all instructions and torque settings, if you have any doubts please
contact your dealer,
*in addition to the torque settings please note all bikes with a dropper type seatpost
have a seatpost clamp maximum torque of 5 N/M.
The inserts are marked
A-E, these letters dictate
what cables can be used;
these are the same for left
and right.
HT:
this is the cover plate
for all cable options
A:
1x Mechanical cable
D:
1x single cable & Di2
HT-Blank:
this is the no cable option
B:
2x Mechanical cables
E:
Single cable and
Live valve
C:
2x mechanical cables
1x hydraulic
If you wish to change or replace the headtube cableguide set
on your SCOTT Spark this kit can be ordered from your local
SCOTT dealer.
SCOTT part number: 266587 and consists of:
2x HT/A/B/C/D
1x HT-Blank/E
These cable guides are fitted with a single bolt, the fixing torque of this must not exceed
0.75-1 N/M.
With the many different cabling options it is possible to customise the cable routing slightly
depending what components you wish to run, it is recommended that handlebar cables
that come from the right hand side enter the frame on the left, and handlebar cables that
come from the left hand side enter the frame on the right, while this is not crucial to the
performance of the bike it may help to
prevent any cable rub
Below is an example of a bike set up
European style” with a 1X set up and a
dropper seatpost.
Please note that below is an example
and that your bikes brakes need to be
set up as per the law in your country,
please check with your local SCOTT
dealer for this information.
17 |
BIKE USER MANUAL | SPARK MY2017SPARK MY2017 | BIKE USER MANUAL
| 16
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scott Spark 2018 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scott Spark 2018 in de taal/talen: Engels als bijlage per email.

De handleiding is 0.98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Scott Spark 2018

Scott Spark 2018 Gebruiksaanwijzing - Deutsch - 10 pagina's

Scott Spark 2018 Gebruiksaanwijzing - Français - 10 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info