664181
11
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
20
SPARK | BIKE OWNER’S MANUAL 2015 BIKE OWNER’S MANUAL 2015 | SPARK
21
SPARK 2014
Tim, 21-Jan-13
User Manual: new points
FD-MOUNT Identification Spark 700 and 900
Spark 900 new FD
adaptor for MY14
Spark 700
NOTE:
Colours in pictures are not representitive of reality
New Spark 900 FD adaptor is not compatible with old Spark 12 CST because some FDs will touch
CST when assembled.
New FD mounts for both Spark 700 and 900.
Some customers complained of shifting problems, so for Spark 900, FD adaptor was changed (from Spark 12) to lower FD by
1mm to be the same as Shimano specs.
Spark 900 FD adaptor can be identified by ID mark 900 and colour is now anodised grey rather than black.
SPARK 2014
Tim, 21-Jan-13
User Manual: new points
FD-MOUNT Identification Spark 700 and 900
Spark 900 new FD
adaptor for MY14
Spark 700
NOTE:
Colours in pictures are not representitive of reality
New Spark 900 FD adaptor is not compatible with old Spark 12 CST because some FDs will touch
CST when assembled.
New FD mounts for both Spark 700 and 900.
Some customers complained of shifting problems, so for Spark 900, FD adaptor was changed (from Spark 12) to lower FD by
1mm to be the same as Shimano specs.
Spark 900 FD adaptor can be identified by ID mark 900 and colour is now anodised grey rather than black.
ENGLISH
ENGLISH
On Spark bikes equipped with the FOX Nude 3/FOX Float CTD shock you can adjust
the BB height above ground in 2 positions by flipping a geometry chip located on the
linkage bar shock mount.
Please note the max.
tightening torque of
10Nm (88 in/lbs)
1. low BB for lower center of gravity over ground, slacker head angle
2. high BB for bigger clearance between pedals/crankset and obstacles on the
ground, steeper head angle
SPARK 700 SPARK 900
LOW POSITION
HEAD ANGLE 68.3° 69.5°
BB HEIGHT 330mm 317mm
HIGH POSITION
HEAD ANGLE 68.8° 70°
BB HEIGHT 336mm 323mm
ADJUSTABLE BB HEIGHT
IMPORTANT!
It is not possible to use this geometry chip with other shock models than the FOX
Nude /FOX Float CTD. The shock might collide with parts of the frame or linkage bar.
Models originally equipped with another shock than the FOX Nude /FOX Float CTD
will have a chip with a centered shock bolt hole.
On all Spark frames you will
find a Shimano E-type front
derailleur but fixed directly on
the swingarm without the plate
that is fixed normally between
the bottom bracket bearing
cup and the bottom bracket
housing of the front triangle
or a SRAM Direct Mount
Type S3 FD.
Please note that you always
need to use the adapter plate
attached to the bike or frame
set between chainstay and
front derailleur.
This adapter can be ordered at the SCOTT distribution with parts number:
235276 FD mount plate Set Spark 700 2014
235278 FD mount plate Set Spark 900 2014
The FD-adapter plates of Spark 700 and 900 series are NOT interchangeable
FRONT DERAILLEUR (FD) MOUNTING DETAILS
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scott Spark - 2014 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scott Spark - 2014 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Scott Spark - 2014

Scott Spark - 2014 Gebruiksaanwijzing - Deutsch - 15 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info