779961
4
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
ENGLISHENGLISH
IMPORTANT!
SCOTT Genius is designed around the BOOST platform so many of the fitted parts:
cranks/wheels/dropouts/forks differ from traditional cycle parts. Always consult your
authorized SCOTT dealer for advice on replacing or repairing any part of your SCOTT bike!
TWINLOC
The TWINLOC system offers simultaneous control of the front and rear shocks with a single
lever allowing the ride of the bike to be adjusted at the flick of a finger.
The 3 basic functions of TWINLOC system are:
-Climb-out Mode: Climb rear / climb front
-Traction Mode: Traction mode rear / platform mode front (where applicable)
-Descent Mode: Full travel rear / full travel front
You can only assemble the “standard” TWINLOC remote lever in “left side upward position”
on the handlebar (this is usually fitted on bikes with x2 front chainrings.)
On bikes with x1 chainring on the front the under bar TWINLOC remote lever in “left side
downward” position can be fitted as standard.
It is possible to change the TWINLOC lever to the underbar option if the bikes gears have
been changed to x1 system, a new alternative lever will be required for this adjustment;
please consult your local SCOTT dealer for more information on obtaining the correct lever
for your bike.
There are 3 positions of the TWINLOC remote lever.
1. CLIMB MODE:
The shock is nearly locked; climbing on asphalt roads is now possible with little power loss.
A simultaneous blow-off-system prevents the shock being damaged in case the rider does
not open the system while crossing obstacles.
2. TRACTION MODE:
By reducing the internal chamber volume inside the shock the travel of the shock will
be reduced, the characteristic of the air spring gets harder this results in climbing with
reduced “bobbing” and offers still optimum traction of the rear wheel.
3. DESCENT MODE:
Full travel of the front and rear shocks.
You will find the following positions on the remote lever:
BASIC SET-UP OF SHOCK & FORKS
Recommended tools for the shock setup:
-The SAG tool that came with your bike.
-A shock pump with a dial up to 20bars/300psi with a special air valve connector (not
supplied with this bike), this will help stop air from escaping while removing the pump
from the shock valve.
Please note that air will flow into the hose and indicator when counterchecking the air
pressure, this will give the appearance that the shock has less air pressure then it was setup,
your shock may need to be adjusted once this action is made.
Please also note that the indicators of shock pumps have a tolerance of max. 10%.
For bikes spec’d with Fox shock and forks:
You can find more specific information about Fox set up on Fox’s website, please use your
fork/shock ID number to find more useful setup tips for your exact fork and shock (please
visit: ridefox.com)
07 |
BIKE USER MANUAL | GENIUSGENIUS | BIKE USER MANUAL
| 06
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scott Genius 2018 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scott Genius 2018 in de taal/talen: Engels als bijlage per email.

De handleiding is 1.06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Scott Genius 2018

Scott Genius 2018 Gebruiksaanwijzing - Deutsch - 10 pagina's

Scott Genius 2018 Gebruiksaanwijzing - Français - 10 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info