782513
69
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 69
With the drag guide (21) not xed in place (21):
Pull the machine head (4) all the way to the front. Lower the handle (1)
to the very bottom by applying steady and light downward pressure.
Now push the machine head (4) slowly and steadily to the very back
until the saw blade (6) has completely cut through the work piece.
When the cutting operation is completed, move the machine head
back to its upper (home) position and release the ON/OFF button (2).
Attention! The machine executes an upward stroke automatically due
to the return spring, i.e. do not release the handle (1) after completing
the cut; instead allow the machine head to move upwards slowly whilst
applying light counter pressure.
8.4 Crosscut 90° and turntable 0°4 (g. 1/7/8)
The sliding compound mitre saw can be used to make crosscuts of
45° to the left and 0° -45° to the right in relation to the stop rail.
Attention! For 9crosscuts, the moveable stop rail (16a) must be xed
in the inner position.
Open the set screw (16b) for the moveable stop rail (16a) and push the
moveable stop rail (16a) inwards.
The moveable stop rail (16a) must be xed far enough in front of the
innermost position that the distance between the stop rail (16a) and
the saw blade (6) amounts to a minimum of 8 mm.
Before making the cut, check that the stop rail (16a) and the saw blade
(6) cannot collide.
Secure the set screw (16b) again.
Loosen the locking handle (11) if tightened, pull up the latched position
lever (35) with your index nger and use the locking handle (11) to set
the rotary table (14) to the desired angle.
The pointer (12) on the rotary table must match the desired angle on
the scale (13) on the xed saw table (15).
Re-tighten the handle (11) to secure the rotary table (14).
Cut as described under section 8.3.
69

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach MST216 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach MST216 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 5,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info