782499
22
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
22 GB
10 Connect the dust extraction device if you
will be processing wood, materials similar to
wood, or plastics.
ATTENTION! The dust extractor must not be
connected when processing metals. Risk of
re and explosion due to hot swarf or ying
sparks! When processing metals, also remove
the dust bag (21).
If connections for dust extraction and a collect-
ing device are present, make sure that they are
connected and used properly.
When processing wood, materials similar to
wood, and plastics. Operation in enclosed
spaces is only permitted with the use of a suit-
able extraction system.
11 Do not use the cable for purposes for which
it is not intended
Do not use the cable to pull the plug out of
the outlet. Protect the cable from heat, oil and
sharp edges.
12 Secure the workpiece
Use the clamping devices or a vice to hold the
workpiece in place. In this manner, it is held
more securely than with your hand.
An additional support is necessary for long
workpieces (table, trestle, etc.) in order to pre-
vent the machine from tipping over.
Always press the workpiece rmly against
the working plate and stop in order to prevent
bouncing and twisting of the workpiece.
13 Avoid abnormal posture
Make sure that you have secure footing and
always maintain your balance.
Avoid awkward hand positions in which a sud-
den slip could cause one or both hands to come
into contact with the saw blade.
14 Take care of your tools
Keep cutting tools sharp and clean in order to
be able to work better and more safely.
Follow the instructions for lubrication and for
tool replacement.
Check the connection cable of the electric tool
regularly and have it replaced by a recognised
specialist when damaged.
Check extension cables regularly and replace
them when damaged.
Keep the handle dry, clean and free of oil and
grease.
15 Pull the plug out of the outlet
Never remove loose splinters, chips or jammed
wood pieces from the running saw blade.
During non-use of the electric tool or prior to
maintenance and when replacing tools such as
saw blades, bits, milling heads.
When the saw blade is blocked due to abnormal
feed force during cutting, turn the machine off
and disconnect it from power supply. Remove
the work piece and ensure that the saw blade
runs free. Turn the machine on and start new
cutting operation with reduced feed force.
16 Do not leave a tool key inserted
Before switching on, make sure that keys and
adjusting tools are removed.
17 Avoid inadvertent starting
Make sure that the switch is switched off when
plugging the plug into an outlet.
18 Use extension cables for outdoors
Only use approved and appropriately identied
extension cables for use outdoors.
Only use cable reels in the unrolled state.
19 Remain attentive
Pay attention to what you are doing. Remain
sensible when working. Do not use the electric
tool when you are distracted.
20 Check the electric tool for potential damage
Protective devices and other parts must be
carefully inspected to ensure that they are fault-
free and function as intended prior to continued
use of the electric tool.
Check whether the moving parts function fault-
lessly and do not jam or whether parts are dam-
aged. All parts must be correctly mounted and
all conditions must be fullled to ensure fault-
free operation of the electric tool.
The moving protective hood may not be xed
in the open position.
Damaged protective devices and parts must be
properly repaired or replaced by a recognised
workshop, insofar as nothing different is speci-
ed in the operating manual.
Damaged switches must be replaced at a cus-
tomer service workshop.
Do not use any faulty or damaged connection
cables.
Do not use any electric tool on which the switch
cannot be switched on and off.
21 ATTENTION!
Exercise elevated caution for double mitre cuts.
22 ATTENTION!
The use of other insertion tools and other ac-
cessories can entail a risk of injury.
23 Have your electric tool repaired by a qualied
electrician
This electric tool conforms to the applicable
safety regulations. Repairs may only be per-
formed by an electrician using original spare
parts. Otherwise accidents can occur.
Additional safety instructions
1 Safety precautions
Warning! Do not use damaged or deformed
saw blades.
Replace a worn table insert.
Only use saw blades recommended by the
manufacturer which conform to EN 847-1.
Make sure that a suitable saw blade for the
material to be cut is selected.
Wear suitable personal protective equipment.
This includes:
Hearing protection to avoid the risk of be-
coming hearing impaired,
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach MS255A Kity bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach MS255A Kity in de taal/talen: Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 6,18 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info