782502
24
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
24 | GB
Follow the instructions for lubrication and for
tool replacement.
Check the connection cable of the electric
tool regularly and have it replaced by a rec-
ognised specialist when damaged.
Check extension cables regularly and replace
them when damaged.
Keep the handle dry, clean and free of oil and
grease.
15 Pull the plug out of the outlet
Never remove loose splinters, chips or
jammed wood pieces from the running saw
blade.
During non-use of the electric tool or prior to
maintenance and when replacing tools such
as saw blades, bits, milling heads.
When the saw blade is blocked due to abnor-
mal feed force during cutting, turn the ma-
chine o󰀨 and disconnect it from power supply.
Remove the work piece and ensure that the
saw blade runs free. Turn the machine on
and start new cutting operation with reduced
feed force.
16 Do not leave a tool key inserted
Before switching on, make sure that keys and
adjusting tools are removed.
17 Avoid inadvertent starting
Make sure that the switch is switched o󰀨
when plugging the plug into an outlet.
18 Use extension cables for outdoors
Only use approved and appropriately identi-
ed extension cables for use outdoors.
Only use cable reels in the unrolled state.
19 Remain attentive
Pay attention to what you are doing. Remain
sensible when working. Do not use the elec-
tric tool when you are distracted.
20 Check the electric tool for potential damage
Protective devices and other parts must be
carefully inspected to ensure that they are
fault-free and function as intended prior to
continued use of the electric tool.
Check whether the moving parts function
faultlessly and do not jam or whether parts
are damaged. All parts must be correctly
mounted and all conditions must be fullled to
ensure fault-free operation of the electric tool.
The moving protective hood may not be xed
in the open position.
Damaged protective devices and parts must
be properly repaired or replaced by a recog-
nised workshop, insofar as nothing di󰀨erent is
specied in the operating manual.
Damaged switches must be replaced at a
customer service workshop.
Do not use any faulty or damaged connection
cables.
6 Do not overload your electric tool
They work better and more safely in the speci-
ed output range.
7 Use the correct electric tool
Do not use low-output electric tools for heavy
work.
Do not use the electric tool for purposes for
which it is not intended. For example, do not
use handheld circular saws for the cutting of
branches or logs.
Do not use the electric tool to cut rewood.
8 Wear suitable clothing
Do not wear wide clothing or jewellery, which
can become entangled in moving parts.
When working outdoors, anti-slip footwear is
recommended.
Tie long hair back in a hair net.
9 Use protective equipment
Wear protective goggles.
Wear a mask when carrying out dust-creating
work.
10 Connect the dust extraction device if you will be
processing wood, materials similar to wood, or
plastics. ATTENTION! The dust extractor must
not be connected when processing metals.
Risk of re and explosion due to hot swarf
or ying sparks!
If connections for dust extraction and a
collecting device are present, make sure that
they are connected and used properly.
When processing wood, materials similar to
wood, and plastics, operation in enclosed
spaces is only permitted with the use of a
suitable extraction system.
11 Do not use the cable for purposes for which it is
not intended
Do not use the cable to pull the plug out of the
outlet. Protect the cable from heat, oil and sharp
edges.
12 Secure the workpiece
Use the clamping devices or a vice to hold
the workpiece in place. In this manner, it is
held more securely than with your hand.
An additional support is necessary for long
workpieces (table, trestle, etc.) in order to
prevent the machine from tipping over.
Always press the workpiece rmly against
the working plate and stop in order to prevent
bouncing and twisting of the workpiece.
13 Avoid abnormal posture
Make sure that you have secure footing and
always maintain your balance.
Avoid awkward hand positions in which a
sudden slip could cause one or both hands to
come into contact with the saw blade.
14 Take care of your tools
Keep cutting tools sharp and clean in order to
be able to work better and more safely.
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach KZS1500 Primaster bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach KZS1500 Primaster in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 5,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info