644558
35
Verklein
Vergroot
Pagina terug
1/288
Pagina verder
www.scheppach.com / ser[email protected] / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 35
10.1.3 Making angular cuts (g. 22)
Angular cuts must always be made using the parallel
stop (7). The parallel stop (7) must always be tted to
the right of the saw blade. Otherwise, workpieces can
become jammed between the parallel stop and the
saw blade during sawing and ejected at speed.
1. Set the saw blade (5) to the desired angle (see
9.3).
2. Set the parallel stop (7) in accordance with the
workpiece width and height (see 9.4).
3. Carry out the cut in accordance with the work-
piece width (see 10.1).
10.2 Making transverse cuts (g. 23)
1. Push the transverse stop (2) into the groove (40)
of the saw table and set it to the required angle
(see 9.5).
2. Use the stop rail (17).
3. Press the workpiece rmly against the transverse
stop (2).
4. Switch on the saw.
5. Push the transverse stop (2) and the workpiece
toward the saw blade (5) in order to make the cut.
m WARNING: Always hold the guided part of the
workpiece. Never hold the part which is to be cut
off.
6. Push the transverse stop (2) forward until the
workpiece is cut all the way through.
7. Switch off the saw again.
8. Do not remove the offcut until the saw blade has
stopped rotating.
10.3 Cutting particle boards
To prevent the cutting edges from cracking when
working with particle boards, you should not set the
saw blade (5) more than 5 mm greater than the thick-
ness of the workpiece (also see 9.2).
11. Transporting the equipment (g. 24)
Turn off the power tool before any transport and
disconnect it from the power supply.
Lower the saw blade (5) as far as possible.
Wind up the mains cable (41).
Carry the power tool with both hands by the xed
saw table (1). Never use the table width extension
to carry the power tool.
Protect the power tool from knocks, bumps and
strong vibrations, such as during transport in ve-
hicles.
Secure the power tool against overturning and slid-
ing.
Never use the safety devices for handling or trans-
porting purposes.
12. Maintaining the equipment
m WARNING: Prior to any adjustment, maintenance
or service work disconnect the mains power plug!
12.1 General maintenance measures
Keep protective devices, air vents, suction open-
ings and the motor housing as free of dust and dirt
as possible. Remove shavings and dust with a vac-
uum cleaner and a brush. In addition, blow it out
with low-pressure compressed air.
We recommend that you clean the equipment im-
mediately after you use it.
Clean the equipment regularly with a damp cloth
and some soft soap. Do not use cleaning agents
or solvents; these may be aggressive to the plastic
parts in the equipment. Ensure that no water can
get into the interior of the equipment.
In order to extend the service life of the tool, oil the
rotary parts once monthly. Do not oil the motor.
12.2 Carbon brushes
In case of excessive sparking, have the carbon
brushes checked only by an electrical specialist.
IMPORTANT: The carbon brushes must not be re-
placed by anyone but an electrical specialist.
Service information
Please note that the following parts of this product
are subject to normal or natural wear and that the fol-
lowing parts are therefore also required for use as
consumables.
Wear parts*: carbon brushes, table inlay, push stick,
saw blade
* Not necessarily included in the scope of delivery!
13. Storing the equipment
Store the device and its accessories in a dark, dry
and frostproof place that is inaccessible to children.
The optimum storage temperature is between 5 and
30˚C.
Store the electrical tool in its original packaging.
Cover the electrical tool in order to protect it from dust
and moisture.
Store the operating manual with the electrical tool.
35

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Scheppach-HS80

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach HS80 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach HS80 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 10,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Scheppach HS80

Scheppach HS80 Gebruiksaanwijzing - Deutsch, English, Français, Italiano, Dansk, Svenska, Suomi - 103 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info