781437
32
Verklein
Vergroot
Pagina terug
1/92
Pagina verder
32 І 92
GB FR DE GB FR DE GB FR DE GB FR DE GB FR
internet: www.scheppach.com / email: service@scheppach.com / telefon: +(49)-08223-4002-99 / telefax: +(49)-08223-4002-58
12. Electrical connection
Power supply
The machine can be connected to any power socket
with 230 V AC. Only safety sockets are permitted
which must be protected with a circuit breaker for 16
Amps. Additionally, a residual-current-operated pro-
tective device (RCD) with a maximum of 30 mA must
be connected!
The installed electric motor is connected and op-
erational. The connection complies with relevant
VDE and DIN stipulations. The customer’s mains
connection as well as the extension lead used
must comply with these provisions.
The product complies with EN 61000-3-11 require-
ments and is subject to conditional connection. That
means that connection to randomly selected points is
not permitted.
Temporary voltage uctuations can be caused in the
machine in the event of unfavourable mains condi-
tions.
The product must exclusively be connected to
points which
a) do not exceed a maximum permitted supply im-
pedance „Z“ (Zmax = 0.382 Ω) or
b) have a continuous current rating of at least 100
A per phase.
As the user, you have to ensure that, if required in
consultation with your energy supplier, the connec-
tion point from which you would like to operate the
product complies with one of the two specied re-
quirements a) or b).
Important notices
If there is a motor overload, it will turn off automatically.
After a cool-down period (timing varies), the motor can
be turned on again.
Defective electrical connections
Insulation damage often occurs on electrical connec-
tions.
Causes can include:
Pressure marks when connections are guided
through windows and doors
Kinks due to inappropriate attachment or guidance
of the connection
Cuts when the connection is run over
Insulation damage when being pulled out of the
wall socket
Tears from ageing insulation
m DANGER
Such defective electrical connections must not be used
and are dangerous to life because of the insulation dam-
age.
Regularly check electrical connections for damage.
Make sure the cable is not connected to the mains when
checking.
Electrical connections must comply with relevant VDE
and DIN stipulations. Only use connections marked
H 05 V V- F.
Printing the type designation on the connection cable
is the law.
Cleaning
Always keep the machine‘s ventilation slots clear
and clean. Regularly remove dust and dirt from the
machine. Cleaning is best with compressed air or
a cloth.
All moveable parts must be lubricated periodically.
Do not use corrosive agents for cleaning the plas-
tic.
General maintenance
Every now and then, remove wood chippings and
dust from the machine with a cloth. To increase the
service life of the rotating parts, lubricate them once
a month. Do not lubricate the motor.
Do not use corrosive agents for cleaning the plastic.
Replacing the mains connection
If this machine‘s mains connection is damaged, it has
to be replaced by the manufacturer, the manufactur-
er‘s customer service or a similarly qualied agent in
order to prevent hazards.
Carbon brushes
In the event of excessive spark development, have
the carbon brushes checked by an electrician.
m WARNING!
The carbon brushes must be replaced by an electri-
cian.
10. Transport
Transport (always in table saw mode)
Move the lower saw blade guard (14) above the saw
guide until you can hear a „click. The front of the
saw blade guard has to be ush with the white line
on the saw guide.
Position the saw button downwards by pressing the
unlocking button (2) on the saw head and activating
the lock pin (20).
Put the rip fence (1) on the saw blade guard and
attach it.
Lift the machine by holding it on both sides of the
lower frame (6).
m WARNING
There is a risk of injury in the event of improper han-
dling of the machine, during lifting or turning.
Always disconnect the mains supply before eve-
ry transport
Only ever transport the saw in table mode and with
the rip fence mounted on the saw blade. This will pre-
vent injury from the saw blade. Never transport the
machine by its safety equipment (e.g. safety guard,
riving knife).
11. Storage
Store the machine and its accessories in a dark, dry
and frost-free place, inaccessible to children. The
ideal storage temperature is between 5 and 30˚C.
Store the power tool in its original packaging.
Cover the power tool to protect it from dust and hu-
midity.
Keep the operating manual with the power tool.
GB
32

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach HM100T bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach HM100T in de taal/talen: Duits, Engels, Pools, Zweeds, Noors als bijlage per email.

De handleiding is 6,16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info