644557
5
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
english 7
MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
we wish you a pleasant and successful working experience
with your new scheppach machine.
Note
According to the applicable product liability law the man-
ufacturer of this device is not liable for damages which
arise on or in connection with this device in case of:
• improper handling,
• non-compliance with the instructions for use,
• repairs by third party, non authorized skilled workers,
• installation and replacement of non-original spare
parts,
• improper use,
• failures of the electrical system due to the non-com-
pliance with the electrical specifications and the VDE
0100, DIN 57113 / VDE 0113 regulations
RECOMMENDATIONS:
Read the entire text of the operating instructions prior to
the assembly and operation of the device.
These operating instructions are intended to make it eas-
ier for you to get familiar with your device and utilize its
intended possibilities of use.
The operating instructions contain important notes on how
to work safely, properly and economically with your ma-
chine and how to avoid dangers, save repair costs, reduce
downtime, and increase the reliability and working life of
the machine.
In addition to the safety regulations contained herein, you
must in any case comply with the applicable regulations of
your country with respect to the operation of the machine.
Put the operating instructions in a clear plastic folder to
protect them from dirt and humidity, and store them near
the machine. The instructions must be read and carefully
observed by each operator prior to starting the work. Only
persons who have been trained in the use of the machine
and have been informed on the related dangers and risks
are allowed to use the machine. The required minimum
age must be met.
In addition to the safety notes contained in the present
operating instructions and the special regulations of your
country, the generally recognized technical rules for the
operation of wood working machines must be observed.
GENERAL NOTES
• When you unpack the device, check all parts for pos-
sible transport damages. In case of complaints the
supplier is to be informed immediately. Complaints re-
ceived at a later date will not be acknowledged.
• Check the delivery for completeness.
• Read the operating instructions to make yourself famil-
iar with the device prior to using it.
• Only use original scheppach parts for accessories as
well as for wearing and spare parts. Spare parts are
available from your specialized dealer.
• Specify our part numbers as well as the type and year
of construction of the device in your orders.
•
GG7600 /GG7800
Delivery
Bench Grinder GG7600/GG7800
User’s Manual
Technical Data
Dimensions L x W x
H mm
385 x 240 x 280 440 x 280 x 340
ø grinding disc mm
left/right
150 200
ø grinding disc bore
mm
12,7 15,88
grinding disc width
mm left/right
25
Weight kg
11,5 14,8
Motor
Motor V/Hz
230/50
Input power P1 W
370 550
Motor speed 1/min
2850
Subject to technical changes!
In these operating instructions we have marked the places
that have to do with your safety with this sign: m
m General Safety Rules
Using electrical tools
When using electric tools basic safety precautions should al-
ways be followowed to reduce the risk of fire, electric shock
and personal injury.
• Keep work area clear. Cluttered areas and benches in-
vite injuries.
• Consider work area environment. Do not expose tools to
rain. Do not use tools in damp or wet locations. Keep
work area well lit. Do not use tools in the presence of
flammable liquids or gases.
• Guard against electric shock. Avoid body contact with
earthed or grounded surfaces.
• Keep other people away. Do not let others, especially
children, not involved in the work touch the tool or
the extension lead and keep them away from the work
area.
• Store idle tools. When not in use, tools should be stored
in a dry locked-up place, out of reach of children.
• Do not force the tools. It will do the job better and safer
at the rate for which it was intended.
• Use the right tool. Do not force small tools to do the
job of a heavy duty tool. Do not use tools for purposes
not intended.
• Dress properly. Do not wear loose clothes or jewellery,
they can be caught in moving parts. Non-skid footwear
is recommended when working outdoors. Wear protec-
tive hair covering to contain long hair.
• Use protective equipment. Use safety glasses. Use face
or dust mask if grinding operations create dust.
• Do not abuse the cable. Never pull the cable to discon-
nect it from the socket. Keep the cable away from heat,
oil and sharp edges.
• Don’t overreach. Keep proper footing and balance at
all time.
• Follow instructions for lubricating and changing ac-
cessories. Inspect tool cables periodically and if dam-
aged have them repaired by an authorized service fa-
cility. Inspect extension lead periodically and replace
if damaged. Keep handles dry, clean and free from oil
and grease.
• Avoid unintentional starting. Ensure switch is in „off“
position when plugged in.
• Use outdoor extension leads. When the tool is used
outdoors, use only extension leads intended for outdoor
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach GG7800 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach GG7800 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 0,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info