781905
21
Verklein
Vergroot
Pagina terug
1/92
Pagina verder
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 21
Note: The handle with 2 cross-recess screws
(B) on the motor casing. (Fig. 4)
5 Place the tub (4) in the base frame (2).
6 Place the cooling water pump (14) in the tub (4).
7 Fill water till the pump (14) is lled completely
with water. (Fig. 4)
8 Pull out the pin of the transport lock (13). (Fig.5)
7. Safety information
Working with the tile-cutting machine can be risky, if
safe and correct work procedures are not followed.
Not observing the customary safety measures can
lead to physical injuries to the operators. Safety
equipment such as protective goggles, dust masks
and ear protection can reduce the risks of possible
injury. Even the best possible protection however,
cannot match incorrect assessment, carelessness or
negligence. Always use your healthy common sense
and caution in the workshop. If you feel an operation
is risky, do not try it out. Think about an alternative
method which feels safer. Think of the following: Your
physical integrity is your personal responsibility. This
machine was designed to perform certain jobs.
We recommend urgently that the machine should not
be altered and it should not be used for application
areas for which it was not designed. If you are not
sure, please ask your dealer before working with the
product.
Warning: Non-observation of these specications
can lead to serious injuries.
1. Keep work area clean Cluttered areas and bench-
es invite injuries.
2. Consider work area environment Don‘t expose pow-
er tools to rain. Don‘t use power tools in damp or wet
locations. Keep work area well lit. Don‘t use power
tools in presence of ammable liquids or gases.
3. Guard against electric shock Prevent body con-
tact with grounded surfaces (e.g. pipes, radiators,
ranges refrigerators).
4. Keep children away Do not let visitors contact tool
or extension cord. All visitors should be kept away
from work area.
5. Store idle tools When not is use, tools should be
stored in dry, high, or locked-up place, out of the
reach of children.
6. Don‘t force tool It will do the job better and safer at
the rate for which it was intended.
7. Use right tool Don‘t force small tools or attach-
ments to do the job of heavy duty tool. Don‘t use
tools for purposes not intended: for example, don‘t
use circular saw for cutting tree limbs or logs.
8. Dress properly Do not wear loose clothing or jew-
ellery. They can be caught in moving parts. Rub-
ber gloves and nonskid footwear are recommend-
ed when working outdoors. Wear protective hair
covering to contain long hair.
Noise output in dB
Sound power level of LWA = 108/111 dB (A) uncertain-
ly 3 dB (A)
Noise pressure level LPA = 95/98 dB (A) uncertainly 3
dB (A) according to DIN EN ISO 3744; EN ISO 11201
4. Delivery scope
Translation from the original instruction manual
Tile-cutter
Cooling water pump
Angle stop
Table extension
4 legs
Handle
Tub
14 mm wrench
Counter torque wrench
5. Attachment
Open the packaging and remove the device care-
fully.
Remove the packaging material as well as the
packaging and transport bracing (if available).
Check that the delivery is complete.
Check the device and accessory parts for trans-
port damage.
If possible, store the packaging until the warranty
period has expired.
Familiarize yourself with the machine with the help
of the operating instructions manual before using
it.
Use only original parts for accessories as well as
consumables and spare parts. Spare parts can be
obtained from your scheppach retailer.
Please quote our article numbers as well as type
and production year in all your orders.
m ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, lm and small parts! There is a risk of swal-
lowing and su󰀨ocation!
6. Construction
Fig.3-5
For packaging purposes, your machine is not fully
assembled.
1 Remove the machine from the packaging and
place carefully to one side on the ground.
2 Introduce the legs (3) into the base frame and lock
them with buttery nuts (A). (Fig. 3)
3 Set the machine on its legs.
4 Install the handle with 2 cross-recess
screws (B) on the motor casing. (Fig. 4)
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach FS850 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach FS850 in de taal/talen: Duits, Engels, Frans, Pools als bijlage per email.

De handleiding is 6,97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info