781635
38
Verklein
Vergroot
Pagina terug
1/176
Pagina verder
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
38 | GB
17. Troubleshooting
Problem Possible Cause Action
The sprayer does not turn
on.
The mains power lead is not plugged in. Plug the mains power lead into a mains power
outlet.
No power is coming from the mains
power outlet. Properly test the power supply voltage.
The extension cord is damaged or has
too low capacity.
Replace the extension cord with a suitable
voltage.
The sprayer shuts of while under pres-
sure.
󰀨
regulate pressure. This is normal.

Spray tip (5) is clogged. Clean spray tip (5) using cleaning pin.
Suction hose is clogged. Clean suction hose (11).
Pressure control dial (9) turned too low. Increase pressure dial control dial (9) setting by
turning the dial clockwise.
Suction hose is too loose.
Re-adjust the suction hose (11) to the suction
-
driver to tighten the screw on the metal hose
clamp suction hose inlet port (16).
 Clean or replace. Use the appropriate cleaning
solution depending on the material used.
The spray tip leaks.
The nozzle guard nut (4) is loose. Tighten the nozzle guard nut (4).
Spray tip (5) was assembled incorrectly. Remove and assemble correctly.
Spray tip (5) is worn. Replace the spray tip /5).
Material leaking
Nozzle guard (4) is loose. Tighten the nozzle guard (4).
Spray tip (5) is worn. Replace the spray tip (5).
Seal inside the nozzle guard (4) is worn. Replace the sealing (28).
Material building up spray tip (5) and
nozzle guard (4).
Clean spray tip (5) and nozzle guard (4) by us-
ing the appropriate cleaning solution depending
on the material used.
Atomization is too coarse.
Material volume too large. Decrease pressure control dial (9) setting.
Spray Tip and Nozzle Guard clogged. Clean.
 Clean or replace.
Pattern runs or sags. Applying too much material Adjust pressure control dial (9) or increase
movement of spray gun (6).
Too much over-spray. Gun too far from spray object. Reduce distance.
Too much material applied. Decrease Pressure control dial (9) setting.
Pattern is very light and
blotchy. Moving the spray gun (6) too fast. Adjust pressure control dial (9) or decrease
movement of spray gun (6).
Spluttering paint. Air bubbles in the return hose (10). Perform "priming the pump" steps.
Suction Hose (11) not
sucking up water when
cleaning the unit.
Lack of pressure.
Using the appropriate cleaning solution in place
of material, perform the "priming the pump"
steps.
38

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach ACS3000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach ACS3000 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 9,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info