638438
5
Verklein
Vergroot
Pagina terug
1/17
Pagina verder
4
SET UP & CONNECTION
Mains Connection
1. Connect the AC power cord to the unit via the AC socket at the back.
2. Plug the AC power cord to the AC mains outlet.
Network Connection
Wired network
1. Check rst of all whether the control lamps (LINK/ACT) of your LAN connection or your router light up.
2. Use an Ethernet cable with RJ45 connector to connect the NETWORK socket of the radio with the LAN port of your
router.
3. Proceed for the operation as described in the below “GETTING STARTED”. But no need to run through the setup
wizard.
Note: Information on the LAN connection can be obtained from the user manual of the router manufacturer.
Wireless network
1. Check rst of all whether the control lamps (LINK/ACT) of your WLAN connection or your router light up.
2. Proceed for the operation as described in the below “GETTING STARTED”. It is highly recommended to run through
the setup wizard in the system settings section.
Note: Information on the WLAN/WiFi network connection can be obtained from the user manual of the router manufacturer.
Walls or other obstacles may inuence the WiFi range. Try to nd the best location to avoid interruption and
interference while operating.
GETTING STARTED
Press the “
” button once to switch on the radio, the display will show the main menu. To go to a function or open a sub-
menu, rotate the SCROLL control followed by pressing on it to conrm. Each function is selected via a menu consisting of
several levels.
Main menu
The following modes can be selected in the main menu:
Internet radio, Music player, FM radio, AUX in, Sleep, Alarms, System settings.
To select your desired function, rotate the SCROLL control followed by pressing on it to conrm.
System settings
Set up wizard
The setup wizard is available in the system settings section, you can run through this to congure settings for date/time
and network, once this has nished, your radio is ready to use.
Note: No need to run through the setup wizard if a wired network is used.
2/24 hour display
To select your preference between 12 and 24 hour clock display format - rotate the SCROLL control followed by pressing
on it to conrm.
Time/Date
The time and date can be manually set or automatically via the network or FM.
Auto update
The auto update works with data sent over FM or the Internet. The clock is only updated when in a corresponding mode,
so it is recommended to select a mode that you use regularly.
1. Select auto update from FM or Network.
2. Select the appropriate time zone if the auto update is done by the Internet.
3. If your country uses daylight saving, the automatically update time may be wrong by one hour. Set the daylight savings
to ON when daylight savings are in effect.
Manual set
1. If “No update” is selected, the wizard will prompt you to set the time and date
manually. The date and time are displayed in dd-mm-yyyy and hh:mm AM/PM
format.
2. The value to be set will ash, rotate the SCROLL control to adjust the value
followed by pressing on it to go for the next setting, rst set the date then nally
the time.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scansonic IN300 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scansonic IN300 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Scansonic IN300

Scansonic IN300 Gebruiksaanwijzing - Nederlands - 17 pagina's

Scansonic IN300 Gebruiksaanwijzing - Deutsch - 17 pagina's

Scansonic IN300 Gebruiksaanwijzing - Français - 17 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info