699394
9
Verklein
Vergroot
Pagina terug
1/11
Pagina verder
SATEL VERSA Plus 7
LED keypad
The state ones lluof z is i strated by LEDs designated by numbers. The steady-on LEDs
ED means that the
cursor is situated there. Use the
indicate which zones are inhibited or isolated. The blinking (flashing) L
and keys to move the cursor. The cursor may
ed over the LEDs corresponding to the zones which can be bypassed or only be mov
unbypassed. Press any digit-bearing key to change the LED status:
LED ON – the zone is to be inhibited,
LED OFF – the zone is to be unbypassed.
Press to quit the function. The zones will be inhibited/unbypassed.
Zone isolating
The isolated zone will remain bypassed until it is unbypassed by the user.
Enter the user menu and press in turn . Information on the bypassed
d. How it will be presented depends on the type of keypad.
d the proce ure a
zones will be displaye
LCD keypad
The way of indicating the zone state an d re identical to those used for
inhibiting the zones, but pressing any number key will change the displayed symbol to one of
the following symbols:
– the zone is to be isolated,
– the zone is to be unbypassed.
LED keypad
The way of indicating the zone status and the procedure are identical to those used for zone
in
g the event log
hibiting.
1.8.3 Viewin
The function is only available in the LCD keypad.
Enter the user menu and press in turn . The last event that occurred in the
ent description includes the time of its occurrence, its name
the partition in which the event took place, the zone which
ed rs automatically a few seconds after
system will be displayed. The ev
and additional information, e.g.
the event, etc. The additional information appeacaus
the event is displayed. Press or f r the o additional information to be displayed
sooner. To scroll through the event log, use the and keys.
1.8.4 Checking the troubles / system state
When the LED is blinking, you can check what caused this signaling. Enter the user
menu and press in turn
. The LCD ad pre ts informkeyp sen ation on the display.
To scroll through the list, use the and keys. In the LED keypad, information on
escription of the LEDs, please refer to the troubles will be presented by means of LEDs (for d
LED keypad user manual).
2. Operating the alarm system by means of keyfob
The alarm system can be operated by means of keyfobs, if the 433 MHz keyfobs receiver
expansion module (INT-RX-S / INT-RX), 433 MHz wireless system controller (VERSA-MCU)
00 / ACU-250) is or ABAX wireless system controller (ACU-120 / ACU-270 / ACU-1
connected to the control panel.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel Versa Plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel Versa Plus in de taal/talen: Engels als bijlage per email.

De handleiding is 0,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel Versa Plus

Satel Versa Plus Snelstart handleiding - Nederlands - 11 pagina's

Satel Versa Plus Gebruiksaanwijzing - Nederlands - 46 pagina's

Satel Versa Plus Aanvulling / aanpassing - Nederlands - 110 pagina's

Satel Versa Plus Aanvulling / aanpassing - Nederlands - 2 pagina's

Satel Versa Plus Installatiehandleiding - Nederlands - 36 pagina's

Satel Versa Plus Snelstart handleiding - Deutsch - 12 pagina's

Satel Versa Plus Aanvulling / aanpassing - Deutsch - 113 pagina's

Satel Versa Plus Gebruiksaanwijzing - Deutsch - 46 pagina's

Satel Versa Plus Installatiehandleiding - Deutsch - 36 pagina's

Satel Versa Plus Gebruiksaanwijzing - English - 44 pagina's

Satel Versa Plus Aanvulling / aanpassing - English - 110 pagina's

Satel Versa Plus Installatiehandleiding - English - 36 pagina's

Satel Versa Plus Installatiehandleiding - English - 32 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info