699458
85
Verklein
Vergroot
Pagina terug
1/87
Pagina verder
SATEL VERSA 83
– EVENTS AMOUNT LIMITING (in the DLOADX program, the option is available in the
reporting options),
– BLOCK AFTER 3 UNKNOWN CODES/CARDS.
disable the global options:
– TAMPER ALARM ALWAYS AUDIBLE,
– ARM EVEN IF NOT READY AFTER EXIT DELAY.
program the AC loss time after which a trouble will be reported to be no longer than 60
minutes (AC LOSS REPORT DELAY global parameter),
in case of arming by means of timers, program the suitable auto-arming delay in partitions
so that the system users can be warned of the automatic arming,
program the entry delay to be no longer than 45 seconds,
enable the AUTO-RESET 3 option for all burglary zones,
disable the A
LARM ON EXIT DELAY END option for alarm zones beyond the exit route,
enable the B
YPASS DISABLED option for tamper, panic and trouble zones,
remember that the operation time of acoustic sirens should be minimum 90 seconds and
maximum 15 minutes (which requires suitable configuration of the cut-off time of alarm
signaling outputs).
14. Control panel firmware update
1. Download the update program for control panel firmware from www.satel.eu.
2. Connect the control panel RS-232 (TTL) port with the computer port (for example, using
the USB-RS converter offered by SATEL).
3. Update the control panel firmware, using one of the methods described below.
When the firmware update is running, the control panel does not execute its normal
functions.
14.1 Standard update procedure
1. Use the keypad to enter the service mode (enter the service code and press , and
then ).
2. Press in turn
. The STARTER function will start. The control panel will
be waiting until communication with the firmware updating program is established (you
can terminate the STARTER function by pressing
).
3. Run the update program for control panel firmware.
4. Click on the button.
5. In the window that will be displayed, indicate the COM port of the computer to which the
control panel is connected and click “OK”. The firmware updating program will establish
communication with the control panel.
6. When a prompt window is displayed asking you whether to continue the firmware update,
click “Yes”. The control panel firmware will be updated.
14.2 Emergency update procedure
If the control panel does not support keypads, does not accept the service code, etc., you
can make use of the following procedure to update the control panel firmware.
85

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel VERSA 15 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel VERSA 15 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel VERSA 15

Satel VERSA 15 Snelstart handleiding - Nederlands - 11 pagina's

Satel VERSA 15 Gebruiksaanwijzing - Nederlands - 44 pagina's

Satel VERSA 15 Snelstart handleiding - Nederlands - 2 pagina's

Satel VERSA 15 Aanvulling / aanpassing - Nederlands - 86 pagina's

Satel VERSA 15 Installatiehandleiding - Nederlands - 35 pagina's

Satel VERSA 15 Snelstart handleiding - Nederlands - 2 pagina's

Satel VERSA 15 Aanvulling / aanpassing - Deutsch - 11 pagina's

Satel VERSA 15 Gebruiksaanwijzing - Deutsch - 44 pagina's

Satel VERSA 15 Installatiehandleiding - Deutsch - 37 pagina's

Satel VERSA 15 Snelstart handleiding - Deutsch - 2 pagina's

Satel VERSA 15 Snelstart handleiding - English - 11 pagina's

Satel VERSA 15 Installatiehandleiding - English - 36 pagina's

Satel VERSA 15 Gebruiksaanwijzing - English - 32 pagina's

Satel VERSA 15 Gebruiksaanwijzing - English - 42 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info