699459
42
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
40 VERSA SATEL
enter the MAC address of ETHM-1 Plus module,
enter the ID number of ETHM-1 Plus module (the individual identification number for the
purpose of communication via the SATEL server),
enter the user code (which will be used when operating the control panel by means of the
application),
select an icon for the control panel (to facilitate identification of the control panel when
using the application),
enable / disable the push notifications of the alarm system events (if you enable the push
notifications, select the events about which you want to be informed).
You can check the MAC address and ID by running the E
XPANDER VER. function in the
keypad (see: “Checking the firmware version of modules” p. 33).
You can enter the MAC address and ID by scanning the QR code with a mobile
device. You can obtain the QR code from the installer or a user who has already
entered the alarm control panel data in the mobile application.
Using a wrong code three times may trigger alarm.
11. Manual update history
The table presents changes made since version 06/15.
Manual version Introduced changes
09/15
Information on VERSA-LCDR keypad has been added (p. 6 and p. 9).
Section describing arming with a proximity card has been modified (p. 11).
Section describing disarming and alarm clearing with a proximity card has been
modified (p. 14).
04/16
Section Built-in proximity card reader” has been updated (p. 9).
Section
Arming with proximity card” has been updated (p. 11).
Note about entry delay time in day armed mode for arming without delay has
been added (p. 12).
Section
Controlling the outputs by means of
proximity card” has been added
(p. 31).
11/17
Information on how the keypad works if blocked has been added (p. 11).
Notes about operation of the proximity card reader in VERSA-LCDM-WRL
keypads have been modified (p. 12 and 14).
Information about entry delay in night arming mode if the system is armed without
delay has been added (p. 12).
List of user functions has been updated (p. 17).
List of information that can be presented on APT-100 keyfob LEDs has been
updated (p. 23).
Description of starting and using the R
EPLACE BAT. function has been added
(p. 34).
Information about MPT-350 keyfob has been added (p. 35).
A note that the QR code can be used to enter control panel data in the VERSA
CONTROL application has been added (p. 40).
A note about possible consequences of entering a wrong code in the VERSA
CONTROL application has been added (p. 40).
42

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel VERSA 10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel VERSA 10 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,76 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel VERSA 10

Satel VERSA 10 Snelstart handleiding - Nederlands - 11 pagina's

Satel VERSA 10 Gebruiksaanwijzing - Nederlands - 44 pagina's

Satel VERSA 10 Snelstart handleiding - Nederlands - 2 pagina's

Satel VERSA 10 Aanvulling / aanpassing - Nederlands - 86 pagina's

Satel VERSA 10 Installatiehandleiding - Nederlands - 35 pagina's

Satel VERSA 10 Snelstart handleiding - Nederlands - 2 pagina's

Satel VERSA 10 Snelstart handleiding - Deutsch - 11 pagina's

Satel VERSA 10 Aanvulling / aanpassing - Deutsch - 89 pagina's

Satel VERSA 10 Gebruiksaanwijzing - Deutsch - 44 pagina's

Satel VERSA 10 Installatiehandleiding - Deutsch - 37 pagina's

Satel VERSA 10 Snelstart handleiding - Deutsch - 2 pagina's

Satel VERSA 10 Snelstart handleiding - English - 11 pagina's

Satel VERSA 10 Aanvulling / aanpassing - English - 87 pagina's

Satel VERSA 10 Installatiehandleiding - English - 36 pagina's

Satel VERSA 10 Gebruiksaanwijzing - English - 32 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info