699072
98
Verklein
Vergroot
Pagina terug
1/102
Pagina verder
96 Programming SATEL
12.1.1 Users and remote switches
The telephone control function requires that REMOTE SWITCH type outputs, which can be
controlled by users, be individually assigned to each user.
12.2 Activation of the phone calls answering
1. Enable the ANSWERING - AUDIO option.
2. Define the rules of call answering by the control panel (RINGS BEFORE ANSWER parameter
and DOUBLE CALL option).
3. Define whether the function is to be available at all times, or only when selected partitions
are armed (function ANSWER IF PARTITIONS ARE ARMED).
4. Program the telephone codes for the users who are to use the function (see: USER
MANUAL).
12.3 Activation of the remote control
1. Activate the call answering function.
2. Enable the REMOTE CONTROL option.
3. Program the selected outputs as the REMOTE SWITCH.
4. Assign the REMOTE SWITCH type outputs to the users who are to use the function.
13. Control panel firmware update
Available on the www.satel.eu website is the current version of control panel firmware and
the FLASHX program enabling to write it to the control panel. In order to update the firmware:
1. Connect the control panel RS-232 or USB port to the computer port (for the connection
method please refer to the INSTALLER MANUAL).
2. Start the FLASHX program.
3. Click on the button to select the file with control panel new firmware.
4. Click on the button to indicate the port to be used for communication with the control
panel and start the firmware update.
5. Using the function available in the service mode, start the STARTER program in the
control panel (RESTARTS STARTER).
During operation of the STARTER program the control panel does not perform
its normal functions (only the status of electronic fuses being monitored).
The STARTER program is waiting 2 minutes for the procedure of control panel
firmware update to begin. If it does not happen, the control panel will return to
the service mode.
If the firmware update is suddenly terminated (e.g. due to loss of power) and, as
a result, the control panel firmware is damaged, the STARTER program will start
automatically and will remain active until the correct firmware is installed.
You can run the STARTER program by shorting the RESET pins when starting
the control panel remove the short immediately after power-up (within approx.
one second).
98

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel Integra 128 Plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel Integra 128 Plus in de taal/talen: Engels als bijlage per email.

De handleiding is 1,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel Integra 128 Plus

Satel Integra 128 Plus Gebruiksaanwijzing - Nederlands - 53 pagina's

Satel Integra 128 Plus Aanvulling / aanpassing - Nederlands - 108 pagina's

Satel Integra 128 Plus Installatiehandleiding - Nederlands - 35 pagina's

Satel Integra 128 Plus Gebruiksaanwijzing - Deutsch - 55 pagina's

Satel Integra 128 Plus Aanvulling / aanpassing - Deutsch - 108 pagina's

Satel Integra 128 Plus Installatiehandleiding - Deutsch - 36 pagina's

Satel Integra 128 Plus Gebruiksaanwijzing - English - 51 pagina's

Satel Integra 128 Plus Installatiehandleiding - English - 35 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info