699393
16
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
14 INT-TSG SATEL
1 long beep – signaling of:
violated / bypassed zones when arming;
fault of the vibration detector (10. 24H VIBRATION type zone was not violated during the
vibration detector test run upon starting the arming procedure).
2 long beeps – incorrect code, function not available or exiting the function without
confirmation of the data entered (e.g. by using the
key).
3 long beeps – unavailable function.
1.3.3 Events signaled by sounds
Only installer selected events are signaled.
Alarms are being signaled throughout the time programmed by the installer.
5 short beeps – zone violation (CHIME).
Long beep every 3 seconds, followed by a series of short beeps for 10 seconds
and 1 long beep – countdown of exit delay (if the time is shorter than 10 seconds, only
the final sequence of short beeps will be generated).
A sequence of 7 beeps of diminishing duration, repeated every few seconds
countdown of auto-arming delay.
2 short beeps every seconds – countdown of entry delay.
2 short beeps every 3 seconds – signaling a new trouble.
Continuous beep – alarm.
Long beep every second – fire alarm.
2. Operating the alarm system
This section describes selected operations which can be executed using the icon-based
menu. The description does not include the user authorization, which will be required when
using the keypad.
The alarm system is operated from the terminal in the same way as when using the LCD
keypad with text menu. For description of the alarm system operation by means of LCD
keypad with text menu, please refer to the control panel user manual.
2.1 Arming
Completion of the steps below will start the arming procedure. The procedure ends when the
exit delay time elapses (if the countdown is completed successfully, the system becomes
armed – see also “Failure of arming procedure” p. 16). If the exit delay time is 0, the system
becomes armed instantly.
For further information on arming, arming modes, etc., please refer to the user manual for
INTEGRA or INTEGRA Plus control panels.
This section describes the operations which must be performed to arm the system in
the "full" mode. To arm the system in other mode you should proceed in much the
same way, except that instead of the icon for arming the system in the "full" mode you
should tap other icon.
The installer can prepare macro commands to simplify the arming procedure
(especially, for the system subdivided into many partitions).
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel INT-TSG-BSB bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel INT-TSG-BSB in de taal/talen: Engels als bijlage per email.

De handleiding is 0,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel INT-TSG-BSB

Satel INT-TSG-BSB Snelstart handleiding - Nederlands - 2 pagina's

Satel INT-TSG-BSB Gebruiksaanwijzing - Nederlands - 18 pagina's

Satel INT-TSG-BSB Gebruiksaanwijzing - Nederlands - 20 pagina's

Satel INT-TSG-BSB Installatiehandleiding - Nederlands - 28 pagina's

Satel INT-TSG-BSB Snelstart handleiding - Deutsch - 2 pagina's

Satel INT-TSG-BSB Gebruiksaanwijzing - Deutsch - 19 pagina's

Satel INT-TSG-BSB Installatiehandleiding - Deutsch - 29 pagina's

Satel INT-TSG-BSB Snelstart handleiding - English - 2 pagina's

Satel INT-TSG-BSB Installatiehandleiding - English - 28 pagina's

Satel INT-TSG-BSB Gebruiksaanwijzing - English - 18 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info