699393
4
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
2 INT-TSG SATEL
1. Introduction
The INT-TSG keypad allows operation and programming of the INTEGRA, INTEGRA Plus,
VERSA and VERSA Plus control panels. This manual applies to the keypad with firmware
version 1.03, which is supported by the following control panels:
INTEGRA and INTEGRA Plus with firmware version 1.13 or newer,
VERSA and VERSA Plus with firmware version 1.04 or newer.
For programming of keypad, the D
LOAD
X program version 1.13.004 or newer is required.
Changes made to the firmware version 1.03
Keypad volume control by the user through the graphic interface.
Ability to display slide show / clock as a screensaver after 10 minutes' inactivity of the
keypad.
Ability to define response of the keypad to wake-up (after a tap on the screen by the user
or occurrence of a specified event in the system).
Compatibility with the VERSA and VERSA Plus control panels.
2. Features
4.3" touch screen.
Intuitive icon-based menu.
Alarm system control by means of macro commands to start a number of different
functions in the control panel.
Customizable status screen.
Display of slide show as a background of the status screen.
LEDs indicating the state of partitions and system.
Built-in reader of microSD memory cards.
Built-in sounder.
2 programmable hardwired zones (supported if the keypad is connected to INTEGRA /
INTEGRA Plus):
support for NO and NC type detectors, as well as roller shutter and vibration detectors;
support for Single EOL, Double EOL and Triple EOL configuration (Triple EOL when
working with INTEGRA Plus control panels);
programming end-of-line resistor values.
Tamper contact reacting to the enclosure opening or detaching from the wall.
3. Installation and hook-up
Disconnect power before making any electrical connections.
The INT-TSG keypad is designed for indoor installation. The place of installation should be
readily accessible to the system users.
1. Open the keypad enclosure (see Fig. 1). The enclosure opening tool, shown in the
illustration, is included in the keypad delivery set.
2. Place the enclosure base on the wall and mark the location of mounting holes. Be sure to
take into account the tamper element mounting hole.
3. Drill the holes for wall plugs (screw anchors).
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel INT-TSG-BSB bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel INT-TSG-BSB in de taal/talen: Engels als bijlage per email.

De handleiding is 0,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel INT-TSG-BSB

Satel INT-TSG-BSB Snelstart handleiding - Nederlands - 2 pagina's

Satel INT-TSG-BSB Gebruiksaanwijzing - Nederlands - 18 pagina's

Satel INT-TSG-BSB Gebruiksaanwijzing - Nederlands - 20 pagina's

Satel INT-TSG-BSB Installatiehandleiding - Nederlands - 28 pagina's

Satel INT-TSG-BSB Snelstart handleiding - Deutsch - 2 pagina's

Satel INT-TSG-BSB Gebruiksaanwijzing - Deutsch - 19 pagina's

Satel INT-TSG-BSB Installatiehandleiding - Deutsch - 29 pagina's

Satel INT-TSG-BSB Snelstart handleiding - English - 2 pagina's

Satel INT-TSG-BSB Gebruiksaanwijzing - English - 20 pagina's

Satel INT-TSG-BSB Gebruiksaanwijzing - English - 18 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info