699578
36
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
34 Programming CA-6
Option 2 refers to blocking the programming of control panel settings in the local mode by
means of modem, which does not require the control panel being operated from the
keypad, i.e. calling function FS112.
Option 3 refers to the control panel dialer and defines the pulse dialing ratio during pulse
dialing of a telephone number. Selecting the option sets its value at 1:1.5. If the option is
not selected, the ratio is 1:2.
Option 4 refers to the panel work with the module that enables the panel to be operated
via a telephone generating DTMF signals. For such a work to be possible, it is necessary
to activate the option 3 from the first set in FS5 („telephone answering”).
SECOND SET OF OPTIONS (the lower A LED is blinking)
No. LED Option
ON
disable arming if battery trouble
1
OFF
arming during battery trouble enabled
ON
automatic clearing zone Auto-Reset at midnight (00:00)
2
OFF
do no reset bypassing of zones with AUTORESET 1/3 option
Option 1 disables the possibility of arming, if the control panel has detected a battery
trouble.
When selected, the option 2 will reset the counters of the zones bypassed after 1 or 3
alarms at 00:00 hour.
FS132 - programming clock correction (DEC)
As time measurement by the control panel internal clock may differ from the real value,
provision has been made for making a daily time correction. The function makes it possible
to correct the time measurement by ±19 seconds within 24 hours. For programming the
time correction, use the function FS132 to enter the value of daily time shift of internal
clock: The programming consists in entering two digits, according to the magnitude of
expected correction (see the table below).
Clock correction [s] -19 -18 -17 ... -2 -1 0 1 2 ... 17 18 19
LED programming 99 98 97 ... 82 81 00 01 02 ... 17 18 19
EXAMPLE:
program the time correction as “-12 seconds”.
[12345] [#] - enter the service mode
[1][3][2] [#] - call the function
[9][2] [#] - enter the correction value (minus 12 seconds).
FS133 - reviewing control panel real-time clock (no change possible)
After calling the function, the LEDs 1 to 8 shows the real time hour (two digits in binary
format), LEDs 1-4 shows the first digit, LEDs 5-8 - the second digit.
EXAMPLE
:

13.00 p.m.
1 2 3 4 5 6 7 8
In order to check the other indications of the clock and calendar, press the appropriate
keys on keypad:
1. hours,
2. minutes,
3. seconds,
4. days,
5. months,
6. years (two last digits).
Use the [#] or [
*
] key to terminate the function
36

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel CA-6 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel CA-6 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel CA-6

Satel CA-6 Aanvulling / aanpassing - Deutsch - 19 pagina's

Satel CA-6 Gebruiksaanwijzing - Deutsch - 19 pagina's

Satel CA-6 Installatiehandleiding - Deutsch - 80 pagina's

Satel CA-6 Gebruiksaanwijzing - Deutsch - 18 pagina's

Satel CA-6 Snelstart handleiding - English - 8 pagina's

Satel CA-6 Installatiehandleiding - English - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info