699578
5
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
SATEL CA-6 3
The master user (administrator) can add new users. For security reasons, each user should
have their individual code. The master user defines an authority level for each user. The
functions to which the user has access depend on the authority level. For description of the
authority levels please refer to the full user manual. The master user can create up to 12
users. The users can have access to one or both partitions.
The service code enables access to the service functions, but does not allow everyday
operation of the control panel (using this code you will not be able to arm or disarm the
system).
3. Arming
Prior to arming, make sure that there are no violated zones (e.g. open windows or doors),
which may prevent the system from arming (if the system has been so configured by the
installer).
After arming, the exit delay countdown may be running, which allows you to leave the
premises without triggering alarm (the zones will be armed only when the exit delay
countdown is finished).
If, during the exit delay countdown, the control panel will not register leaving the premises
(the zone monitoring the exit route will not be violated), the selected zones can be
automatically bypassed, thus enabling you to stay in the protected premises. The installer
shall define which zones are to be bypassed in such a case.
3.1 Full arming
Enter the code and confirm using # key. The partition(s) to which the user has access will be
armed.
Note: The user having the authority 7 can only activate partial armed mode (the installer
selected zones will be bypassed).
3.2 Quick arming
If your installer has enabled the Quick Arm feature, you will be able to arm the system without
using the code. To quickly arm the system, press in turn the keys:
0# - both partitions;
1# - partition A;
2# - partition B.
3.3 Arming in silent mode
During the silent armed mode, the alarms from zones are only signaled on the keypad
(however, the installer can program the control panel output so that it can provide information
about alarms being signaled on the keypad). After activating the silent armed mode, the
installer selected zones will be bypassed.
1. Enter the code and confirm using key. The , and LEDs will start blinking.
2. Press the 5 key. The partition(s) to which the user has access will be armed in silent
mode.
4. Disarming and alarm clearing
In order to disarm the partition and clear the alarm, enter the code and confirm with the # key.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel CA-6 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel CA-6 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel CA-6

Satel CA-6 Aanvulling / aanpassing - Deutsch - 19 pagina's

Satel CA-6 Gebruiksaanwijzing - Deutsch - 19 pagina's

Satel CA-6 Installatiehandleiding - Deutsch - 80 pagina's

Satel CA-6 Gebruiksaanwijzing - Deutsch - 18 pagina's

Satel CA-6 Aanvulling / aanpassing - English - 40 pagina's

Satel CA-6 Installatiehandleiding - English - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info