699607
20
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
U
SER
M
ANUAL
CA-5
18
6.9 BI
OUTPUTS
[CODE][
*
][8][#]
The purpose of the function is determined by the installer. It can be used, for example, for
switching on the external lighting or any electrical devices.
The function is active when the BI
SWITCH
type is selected for one of the outputs.
Using the function will permanently change the output status into the opposite one (until the
function is used again). An inactive output will be activated, and an active output will be
deactivated.
Switching the output on is confirmed by the keypad with four short beeps and a long one,
while switching it off – with three short beeps.
6.10 P
OWER
S
UPPLY
R
ESET
[CODE][
*
][9][#]
The function is used for handling special detectors equipped with individual on/off memory,
which is cleared by shutting down power supply (for example, smoke detectors). Calling the
function temporarily disconnects power supply for such detectors.
The function is active when the RESETTABLE
POWER
type is selected for one of the outputs.
6.11 E
VENTS
[
FUNCTION
10
ONLY
LCD
KEYPAD
]
The function is available in LCD keypad and makes it possible to view the whole contents of
the events log (the last 255). To view the events, the user function menu should be opened
with master user code or with service code, and next the “Events” function should be called.
The way of viewing is described in section HOLD DOWN USER FUNCTIONS.
6.12 T
ESTING OUTPUTS AND LED INDICATORS
[CODE][
*
][11][#]
The function makes it possible to check the current status of the control panel outputs
(active/inactive), as well as functioning of the outputs and devices connected to them. After
calling the function from the LED type keypad, the control panel will indicate the current
status of outputs on LEDs with corresponding numbers: 1 – OUT1, 2 – OUT2, 3 – OUT3. The
lit up LED means active output, the extinguished LED inactive output. In the LCD keypad, the
status of outputs is displayed on the first three characters of the second line of the display.
The active outputs are indicated by displaying a corresponding digit (1, 2, or 3), and the
inactive – by displaying a dot. In order to carry out the functional test of the output
(arm/disarm), press the key with the number of specified output. By repeatedly pressing the
same key the output status will be toggled to the opposite one. Activation/deactivation of an
output is acknowledged by three short beeps.
Additionally, the function makes it possible to check operation of the LEDs in all keypads
connected to the control panel. Press the key [0] when the function is active to light up all the
LEDs (indicators and keypad illumination) which were unlit at the given moment. Press any
key with another digit number to extinguish the LEDs which were turned on for the duration of
the test.
After quitting the function key [#] or [
*
], the control panel will restore the previous status of the
outputs, from before calling the function.
6.13 S
ERVICE ACCESS
[CODE][
*
][12][#]
The function, which is available to the master user, allows the installer to access the system
by using the service code. It requires some data – i.e. the time period during which the
service mode of the control panel will be available to the installer (service). After expiry of the
preprogrammed time, the access will be blocked, except when the value 99 is set, which
makes permanent the service mode access by using the code (default setting). In order to
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel CA-5 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel CA-5 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel CA-5

Satel CA-5 Aanvulling / aanpassing - Deutsch - 20 pagina's

Satel CA-5 Gebruiksaanwijzing - Deutsch - 24 pagina's

Satel CA-5 Installatiehandleiding - Deutsch - 28 pagina's

Satel CA-5 Aanvulling / aanpassing - English - 20 pagina's

Satel CA-5 Snelstart handleiding - English - 12 pagina's

Satel CA-5 Installatiehandleiding - English - 27 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info