699869
3
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
SATEL ARU-100 3
4. Installation and start-up
Disconnect power before making any electrical connections.
The repeater should be installed indoors, in spaces with normal air humidity. Prior to
installation you should plan the arrangement of all ABAX system wireless devices, whose
signals are to be retransmitted. Location of the repeater installation should be selected so
that these devices are within the repeater operating range and, at the same time, that the
repeater is within the ACU-100 / ACU-250 / ACU-120 / ACU-270 controller operating range.
The radio communication range depends not only on the installation location, but also on the
position of repeater antenna, i.e. on how the enclosure is mounted (horizontally, vertically,
diagonally). Please note that thick walls, metal partitions, etc. will reduce the range of the
radio signal. It is recommended that the repeater be mounted high above the floor. This will
allow you to get a better range of radio communication and avoid the risk of the repeater
being accidentally covered by people moving around the premises. Mounting the repeater
near electrical installations is not advisable, as this may cause malfunction of the device.
An unswitched 230 V AC supply must be available at the repeater installation place. The
power supply circuit should be protected with a proper safety device. The owner or user of
the alarm system should be instructed on how to disconnect the device from the mains (e.g.
by indicating the circuit breaker which protects the repeater supply circuit).
1. Place the repeater at the location of intended installation.
2. Remove the cover locking screws and take off the cover.
3. Temporarily connect the repeater to 230 V AC mains (L terminal – phase wire; N terminal
– neutral wire). The power circuit must be de-energized.
4. Energize the circuit to which the repeater is connected.
5. Add the repeater to the ABAX system (see the ACU-100 / ACU-250 / ACU-120 / ACU-270
controller manual). The repeater will take up two positions on the list of devices.
6. Replace the cover back.
7. Check the level of signal received from the repeater by the ABAX system controller. If it is
lower than 40%, select another installation location. You can also try to turn the enclosure
to check the effect the change in antenna position will have on the signal level.
8. Having checked that the selected location and manner of enclosure installation will ensure
the optimum level of radio signal, de-energize the power circuit, remove the cover and
disconnect the power wires.
9. Place the enclosure base against the wall and mark the location of mounting holes.
10. Drill the holes for wall plugs (screw anchors).
11. Make an opening for power wires in the enclosure base.
12. Run the power wires through the opening made.
13. Using wall plugs (screw anchors) and screws, fasten the enclosure base to the wall.
14. Attach the power wires to the corresponding screw terminals: the phase wire to L
terminal, the neutral wire to N terminal (secure the cable using the element specially
provided for this purpose – see Fig. 2).
15. Connect the battery to the socket (the repeater will not start on connecting the battery
alone).
16. Replace the cover and lock it with screws.
17. Energize the circuit to which the repeater is connected.
18. Using the keypad connected to the alarm control panel or the D
LOAD
X program define
which wireless devices are to communicate with the controller via the repeater (for
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel ARU-100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel ARU-100 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel ARU-100

Satel ARU-100 Gebruiksaanwijzing - Nederlands - 4 pagina's

Satel ARU-100 Gebruiksaanwijzing - Deutsch - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info