The following accessories (sold separately) are available at your
Saris Dealer for use with your Cycle-On:
#12398 strap for high spoke wheels
Parts List
Part #
Description
12865 Frame
12870 Wheel Tray
8001-82 3/8” Washer
12885 3/8” Bolt
10797 3/8” Nut
12886 Cap Plug
15054 Tilt Bracket IP
14903 Wheel Tray
12998 Tilt Bracket
12870 Wheel Tray IP
12888 Upright Arm Assembly
12881 Nut 3/8” torque
14905 Rear Wheel Clamp
981 Locking Cable
CAUTION:
1) Read and follow instructions carefully. Save owner's manual for future reference or parts
information.
2) Be certain any future user of this carrier is aware of correct attachment and use.
3) Vehicle should be in good condition in the area at which the hitch is located.
4) Small bicycles must be loaded closest to vehicle. BICYCLES WITH 20” OR SMALLER
WHEELS CAN NOT BE MOUNTED ON #4012 Add-On OR THE 4022 Add-On.
5) Upright arms must be folded in and slid into base when not in use.
6) This hitch mounted carrier is not recommended for off-road use.
7) If vehicles’ receiver is deeper than 3" from bumper, use caution when stowing rack in
vertical position to avoid contact with vehicle.
8) Do not step on the rack.
9) Do not take the rack through the car wash.
10) It's the consumers responsibility to ensure that the use of this rack complies with local
regulations, regarding issues such as distance of load behind vehicle and partial
covering of license plate or taillights.
11) This rack is not suitable for use on any type of trailer.
WARNING AND DISCLAIMER:
This carrier has been designed to carry bicycles on specific vehicles. Before installation, user must read and follow current Vehicle/Carrier
Compatibility Guide recommendations (available through Saris dealer or the Saris Web site www.sarisproducts.com) and enclosed instruc-
tions. Fit recommendations are based on vehicle's standard features; optional features may affect the fit recommendations. User must
attach carrier correctly to the vehicle, check its attachment before each use, and inspect carrier parts for wear. Carrier's attachment to the
vehicle is critical and beyond the control of the manufacturer. Manufacturer and seller expressly disclaim any and all liability for personal
injury, property damage or loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate main-
tenance, or neglect of this carrier.
WARRANTY:
We warrant this product to the first consumer to be free from defect in material and workmanship for a lifetime. (Please retain your sales slip
for your records.) Any product or part thereof found to be defective within that period will be replaced without charge provided that: (1) the
product was not misused; (2) no alterations or modifications were made; (3) its failure resulted from a defect in material or workmanship and
not from normal wear expected in the use of the product; (4) the product or part is delivered, freight prepaid, to Graber Products. User must
call Graber for a return authorization number before rack is returned. Manufacturers only obligation shall be to replace such products or parts
proved to be defective.
Cycle-On Tongue Weight Limitations
Hitch
Type
Minimum Required
Vehicle Tongue Wt.
Maximum Load
Model #
1-1/4”
200 lbs.
200 lbs.
2 bikes @ 35 lbs. per bike
2 bikes @ 60 lbs. per bike
4013
4017
2”
200 lbs.
200 lbs.
2 bikes
@
35 lbs. per bike
2 bikes
@
60 lbs. per bike
4014
4018
Cycle-On Add-On Kits Tongue Weight Limitations
1-1/4” OR 2”
300 lbs.
300 lbs.
1 bike
@
35 lbs. per bike
2 bike
@
35 lbs. per bike
4021
4012, 4022
* The 4013, 4017, 4014,4018, require the purchase of the 4021 Cycle-On 1 bike Add-On kit to carry 3 bikes or the
4012 or 4022 2 bike Cycle-On Add-on Kit to carry 4 bikes.
NOTE: THE ADD-ON KITS WILL ONLY CARRY A MAXIMUM LOAD OF 35LBS. PER BIKE!!!
CAUTION!
THE ADD-ON KITS WILL
ONLY CARRY A MAXIMUM
LOAD OF 35LBS. PER
BIKE!
